On Fri, 03 May 2024 16:20:48 +0200, Théo Lebrun wrote: > Add documentation to describe the "Other Logic Block" system-controller. > It deals with three platforms: EyeQ5, EyeQ6L and EyeQ6H. First two have > a single instance, whereas EyeQ6H has seven named instances. > > Features provided are: > - Clocks, children to main crystal. Some PLLs and divider clocks. > - Resets. EyeQ6H central, south, DDR0 and DDR1 do not have resets. > - Pinctrl. Only EyeQ5 has such feature. > > Those are NOT the only registers exposed in OLB system-controllers! Many > individual registers, related to IP block integration, can be found. > > We simplify devicetree references to OLB in two ways: > - Compatibles exposing a single clock do not ask for a index argument. > - Compatibles exposing a single reset domain do not ask for a domain > index, only a reset index. > > About pinctrl subnodes: all pins have two functionality, either GPIO or > something-else. The latter is pin dependent, we express constraints > using many if-then. > > Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx> > --- > .../bindings/soc/mobileye/mobileye,eyeq5-olb.yaml | 375 +++++++++++++++++++++ > MAINTAINERS | 2 + > include/dt-bindings/clock/mobileye,eyeq5-clk.h | 21 ++ > 3 files changed, 398 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/snps,dwmac.yaml: mac-mode: missing type definition doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240503-mbly-olb-v2-3-95ce5a1e18fe@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
