Define platform symbols for all 8250 style uart type supported by zboot, plus Loongson-2K and boston. Reviewed-by: Philippe Mathieu-Daudé <philmd@xxxxxxxxxx> Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx> --- arch/mips/Kconfig.debug | 56 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 323ad3ec643b..3609d298a9eb 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -209,6 +209,54 @@ choice selecting one of the platform specific options below if you know the parameters for the port. + config DEBUG_BOSTON_UART + bool "Kernel low-level debugging messages via Boston UART" + depends on MIPS_GENERIC_KERNEL + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on IMG Boston board. + + config DEBUG_MALTA_UART + bool "Kernel low-level debugging messages via malta UART" + depends on MIPS_MALTA + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on MTI malta board. + + config DEBUG_AR71XX_UART + bool "Kernel low-level debugging messages via AR71XX UART" + depends on ATH79 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on AR71xx based platforms. + + config DEBUG_LOONGSON3_UART + bool "Kernel low-level debugging messages via Loongson-3 UART" + depends on MACH_LOONGSON64 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Loongson-3 systems. + + config DEBUG_LOONGSON2K_UART + bool "Kernel low-level debugging messages via Loongson 2K UART" + depends on MACH_LOONGSON64 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Loongson-2K SoCs. + + config DEBUG_INGENIC_UART + bool "Kernel low-level debugging messages via Ingenic UART" + depends on MACH_INGENIC_SOC + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on uart0 of Ingenic SoCs. + endchoice config DEBUG_LL_INCLUDE @@ -239,6 +287,12 @@ config DEBUG_UART_FLOW_CONTROL config DEBUG_UART_PHYS hex "Physical base address of debug UART" depends on DEBUG_LL_UART + default 0x17ffe000 if DEBUG_BOSTON_UART + default 0x1fd003f8 if DEBUG_MALTA_UART + default 0x18020000 if DEBUG_AR71XX_UART + default 0x1fd003f8 if DEBUG_LOONGSON3_UART + default 0x1fe00000 if DEBUG_LOONGSON2K_UART + default 0x10030000 if DEBUG_INGENIC_UART help This is the physical base address of the debug UART. It must be accessible from unmapped kernel space (i.e. KSEG1 for 32bit kernels @@ -247,6 +301,8 @@ config DEBUG_UART_PHYS config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default 1 if DEBUG_MALTA_UART || DEBUG_LOONGSON3_UART || \ + DEBUG_LOONGSON2K_UART default 2 config DEBUG_UART_8250_WIDTH -- 2.34.1
