On 10/04/2024 19:12, Théo Lebrun wrote:
> The OLB ("Other Logic Block") is a syscon region hosting clock, reset
> and pin controllers. It contains registers such as I2C speed mode that
> need to be accessible by other nodes.
>
> Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
> ---
> arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> index 6cc5980e2fa1..e82d2a57f6da 100644
> --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> @@ -100,6 +100,14 @@ uart2: serial@a00000 {
> clock-names = "uartclk", "apb_pclk";
> };
>
> + olb: system-controller@e00000 {
> + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd";
> + reg = <0 0xe00000 0x0 0x400>;
> + ranges = <0x0 0x0 0xe00000 0x400>;
> + #address-cells = <1>;
> + #size-cells = <1>;
Do not add incomplete node. ranges, address/size-cells are incorrect in
this context and you will have warnings.
Add complete node, so these properties make sense.
Best regards,
Krzysztof
