[PATCH 11/11] MIPS: mobileye: eyeq5: add octal flash node to eval board DTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add SPI-NOR octal flash node to evaluation board devicetree.

Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
---
 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
index 6898b2d8267d..0e5fee7b680c 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
+++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
@@ -21,3 +21,18 @@ memory@0 {
 		      <0x8 0x02000000 0x0 0x7E000000>;
 	};
 };
+
+&ospi {
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* chip select */
+
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <8>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <400>;
+		cdns,tsd2d-ns = <400>;
+		cdns,tchsh-ns = <125>;
+		cdns,tslch-ns = <50>;
+	};
+};

-- 
2.44.0





[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux