[PATCH v2 3/3] mips: dts: ralink: mt7621: add serial1 and serial2 nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add serial1 and serial2 nodes to define the existence of
the MT7621's second and third UARTs.

Signed-off-by: Justin Swartz <justin.swartz@xxxxxxxxxxxxxxxx>
---
 arch/mips/boot/dts/ralink/mt7621.dtsi | 28 +++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 3ad4e2343..5a89f0b8c 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -124,6 +124,34 @@ serial0: serial@c00 {
 			pinctrl-0 = <&uart1_pins>;
 		};
 
+		serial1: serial@d00 {
+			compatible = "ns16550a";
+			reg = <0xd00 0x100>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			clocks = <&sysc MT7621_CLK_UART2>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
+			status = "disabled";
+		};
+
+		serial2: serial@e00 {
+			compatible = "ns16550a";
+			reg = <0xe00 0x100>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			clocks = <&sysc MT7621_CLK_UART3>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pins>;
+			status = "disabled";
+		};
+
 		spi0: spi@b00 {
 			status = "disabled";
 
-- 





[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux