Since we have now a common helper to read port properties
use it instead of sparse home grown solution.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_pxa.c | 22 +++++++++-------------
1 file changed, 9 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index 77686da42ce8..f1a51b00b1b9 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -92,11 +92,7 @@ static int serial_pxa_probe(struct platform_device *pdev)
struct uart_8250_port uart = {};
struct pxa8250_data *data;
struct resource *mmres;
- int irq, ret;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
+ int ret;
mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mmres)
@@ -114,21 +110,21 @@ static int serial_pxa_probe(struct platform_device *pdev)
if (ret)
return ret;
- ret = of_alias_get_id(pdev->dev.of_node, "serial");
- if (ret >= 0)
- uart.port.line = ret;
-
uart.port.type = PORT_XSCALE;
- uart.port.iotype = UPIO_MEM32;
uart.port.mapbase = mmres->start;
- uart.port.regshift = 2;
- uart.port.irq = irq;
- uart.port.fifosize = 64;
uart.port.flags = UPF_IOREMAP | UPF_SKIP_TEST | UPF_FIXED_TYPE;
uart.port.dev = &pdev->dev;
uart.port.uartclk = clk_get_rate(data->clk);
uart.port.pm = serial_pxa_pm;
uart.port.private_data = data;
+
+ ret = uart_read_port_properties(&uart.port);
+ if (ret)
+ return ret;
+
+ uart.port.iotype = UPIO_MEM32;
+ uart.port.regshift = 2;
+ uart.port.fifosize = 64;
uart.dl_write = serial_pxa_dl_write;
ret = serial8250_register_8250_port(&uart);
--
2.43.0.rc1.1.gbec44491f096
