Add the devicetree node for the reset controller on the Mobileye EyeQ5
platform. It appears as a subnode to the OLB syscon as its registers
are located in this shared register region.
Add reset phandles to UART nodes.
Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
---
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 1a65b43e13b1..76935f237ab5 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -78,6 +78,7 @@ uart0: serial@800000 {
interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
+ resets = <&reset 0 10>;
};
uart1: serial@900000 {
@@ -88,6 +89,7 @@ uart1: serial@900000 {
interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
+ resets = <&reset 0 11>;
};
uart2: serial@a00000 {
@@ -98,6 +100,7 @@ uart2: serial@a00000 {
interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
+ resets = <&reset 0 12>;
};
olb: system-controller@e00000 {
@@ -107,6 +110,13 @@ olb: system-controller@e00000 {
#address-cells = <1>;
#size-cells = <1>;
+ reset: reset-controller@e00000 {
+ compatible = "mobileye,eyeq5-reset";
+ reg = <0x000 0x0c>, <0x200 0x34>, <0x120 0x04>;
+ reg-names = "d0", "d1", "d2";
+ #reset-cells = <2>;
+ };
+
clocks: clock-controller@e0002c {
compatible = "mobileye,eyeq5-clk";
reg = <0x02c 0x50>, <0x11c 0x04>;
--
2.44.0
