Since we have now a common helper to read port properties
use it instead of sparse home grown solution.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_tegra.c | 26 +++++++++-----------------
1 file changed, 9 insertions(+), 17 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c
index ba352262df75..ce48d02dfa0d 100644
--- a/drivers/tty/serial/8250/8250_tegra.c
+++ b/drivers/tty/serial/8250/8250_tegra.c
@@ -57,25 +57,11 @@ static int tegra_uart_probe(struct platform_device *pdev)
port = &port8250.port;
spin_lock_init(&port->lock);
- port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT |
- UPF_FIXED_TYPE;
- port->iotype = UPIO_MEM32;
- port->regshift = 2;
+ port->flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_FIXED_TYPE;
port->type = PORT_TEGRA;
- port->irqflags |= IRQF_SHARED;
port->dev = &pdev->dev;
port->handle_break = tegra_uart_handle_break;
- ret = of_alias_get_id(pdev->dev.of_node, "serial");
- if (ret >= 0)
- port->line = ret;
-
- ret = platform_get_irq(pdev, 0);
- if (ret < 0)
- return ret;
-
- port->irq = ret;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
@@ -88,12 +74,18 @@ static int tegra_uart_probe(struct platform_device *pdev)
port->mapbase = res->start;
port->mapsize = resource_size(res);
+ ret = uart_read_port_properties(port, true);
+ if (ret)
+ return ret;
+
+ port->iotype = UPIO_MEM32;
+ port->regshift = 2;
+
uart->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
if (IS_ERR(uart->rst))
return PTR_ERR(uart->rst);
- if (device_property_read_u32(&pdev->dev, "clock-frequency",
- &port->uartclk)) {
+ if (!port->uartclk) {
uart->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(uart->clk)) {
dev_err(&pdev->dev, "failed to get clock!\n");
--
2.43.0.rc1.1.gbec44491f096
