On Fri, Feb 16, 2024 at 06:42:09PM +0100, Gregory CLEMENT wrote: > Hello, > > The EyeQ5 SoC from Mobileye is based on the MIPS I6500 architecture > and features multiple controllers such as the classic UART, I2C, SPI, > as well as CAN-FD, PCIe, Octal/Quad SPI Flash interface, Gigabit > Ethernet, MIPI CSI-2, and eMMC 5.1. It also includes a Hardware > Security Module, Functional Safety Hardware, and MJPEG encoder. > > One peculiarity of this SoC is that the physical address of the DDDR > exceeds 32 bits. Given that the architecture is 64 bits, this is not > an issue, but it requires some changes in how the mips64 is currently > managed during boot. > > In this eighth version, I rebased the series onto the one sent by > Jixuan to unify register numbering macros for uasm. I also addressed > the comments from Thomas Bogendoerfer, especially regarding the use of > cache memory to copy the vectors. > > To build and test the kernel, we need to run the following commands: > > make eyeq5_defconfig > make vmlinuz.itb > [..] > Gregory CLEMENT (12): > MIPS: spaces: Define a couple of handy macros > MIPS: traps: Give more explanations if ebase doesn't belong to KSEG0 > MIPS: cps-vec: Use macros for 64bits access > dt-bindings: Add vendor prefix for Mobileye Vision Technologies Ltd. > dt-bindings: mips: cpus: Sort the entries > dt-bindings: mips: cpu: Add I-Class I6500 Multiprocessor Core > dt-bindings: mips: Add bindings for Mobileye SoCs > MIPS: mobileye: Add EyeQ5 dtsi > MIPS: mobileye: Add EPM5 device tree > MIPS: Share generic kernel code with other architecture > MIPS: Add support for Mobileye EyeQ5 > MAINTAINERS: Add entry for Mobileye MIPS SoCs > > Jiaxun Yang (2): > MIPS: Fix set_uncached_handler for ebase in XKPHYS > MIPS: Allows relocation exception vectors everywhere > > .../devicetree/bindings/mips/cpus.yaml | 13 +- > .../devicetree/bindings/mips/mobileye.yaml | 32 ++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > MAINTAINERS | 12 + > arch/mips/Kbuild | 1 + > arch/mips/Kbuild.platforms | 1 + > arch/mips/Kconfig | 57 ++++ > arch/mips/boot/dts/Makefile | 1 + > arch/mips/boot/dts/mobileye/Makefile | 4 + > arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 23 ++ > .../boot/dts/mobileye/eyeq5-fixed-clocks.dtsi | 292 ++++++++++++++++++ > arch/mips/boot/dts/mobileye/eyeq5.dtsi | 124 ++++++++ > arch/mips/configs/eyeq5_defconfig | 108 +++++++ > arch/mips/generic/Makefile | 6 +- > arch/mips/include/asm/addrspace.h | 5 + > arch/mips/include/asm/mach-generic/spaces.h | 4 + > arch/mips/include/asm/mips-cm.h | 1 + > arch/mips/include/asm/smp-cps.h | 9 +- > arch/mips/kernel/cps-vec.S | 54 +--- > arch/mips/kernel/smp-cps.c | 141 +++++++-- > arch/mips/kernel/traps.c | 7 +- > arch/mips/mobileye/Makefile | 1 + > arch/mips/mobileye/Platform | 16 + > arch/mips/mobileye/board-epm5.its.S | 24 ++ > arch/mips/mobileye/vmlinux.its.S | 32 ++ > 25 files changed, 890 insertions(+), 80 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mips/mobileye.yaml > create mode 100644 arch/mips/boot/dts/mobileye/Makefile > create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts > create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi > create mode 100644 arch/mips/boot/dts/mobileye/eyeq5.dtsi > create mode 100644 arch/mips/configs/eyeq5_defconfig > create mode 100644 arch/mips/mobileye/Makefile > create mode 100644 arch/mips/mobileye/Platform > create mode 100644 arch/mips/mobileye/board-epm5.its.S > create mode 100644 arch/mips/mobileye/vmlinux.its.S series applied to mips-next. I've fixed generic|ingenic|realtek builds by adding select MACH_GENERIC_CORE in arch/mips/Kconfig. Thomas. -- Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]
