Add resets properties to each I2C controller. This depends on the
reset-eyeq5 platform reset controller driver.
Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
---
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index d27e164f0fc1..c0842836fcc8 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -80,6 +80,7 @@ i2c0: i2c@300000 {
#size-cells = <0>;
clocks = <&i2c_ser_clk>, <&i2c_clk>;
clock-names = "i2cclk", "apb_pclk";
+ resets = <&reset 0 13>;
mobileye,olb = <&olb>;
mobileye,id = <0>;
};
@@ -94,6 +95,7 @@ i2c1: i2c@400000 {
#size-cells = <0>;
clocks = <&i2c_ser_clk>, <&i2c_clk>;
clock-names = "i2cclk", "apb_pclk";
+ resets = <&reset 0 14>;
mobileye,olb = <&olb>;
mobileye,id = <1>;
};
@@ -108,6 +110,7 @@ i2c2: i2c@500000 {
#size-cells = <0>;
clocks = <&i2c_ser_clk>, <&i2c_clk>;
clock-names = "i2cclk", "apb_pclk";
+ resets = <&reset 0 15>;
mobileye,olb = <&olb>;
mobileye,id = <2>;
};
@@ -122,6 +125,7 @@ i2c3: i2c@600000 {
#size-cells = <0>;
clocks = <&i2c_ser_clk>, <&i2c_clk>;
clock-names = "i2cclk", "apb_pclk";
+ resets = <&reset 0 16>;
mobileye,olb = <&olb>;
mobileye,id = <3>;
};
@@ -136,6 +140,7 @@ i2c4: i2c@700000 {
#size-cells = <0>;
clocks = <&i2c_ser_clk>, <&i2c_clk>;
clock-names = "i2cclk", "apb_pclk";
+ resets = <&reset 0 17>;
mobileye,olb = <&olb>;
mobileye,id = <4>;
};
--
2.43.1
