Hello,
On Wed Jan 24, 2024 at 8:05 AM CET, Krzysztof Kozlowski wrote:
> On 23/01/2024 19:46, Théo Lebrun wrote:
> > Add the Mobileye EyeQ5 clock controller driver. It might grow to add
> > support for other platforms from Mobileye.
> >
> > It handles 10 read-only PLLs derived from the main crystal on board. It
> > exposes a table-based divider clock used for OSPI. Other platform
> > clocks are not configurable and therefore kept as fixed-factor
> > devicetree nodes.
> >
> > Two PLLs are required early on and are therefore registered at
> > of_clk_init(). Those are pll-cpu for the GIC timer and pll-per for the
> > UARTs.
> >
>
>
> > +#define OLB_PCSR1_RESET BIT(0)
> > +#define OLB_PCSR1_SSGC_DIV GENMASK(4, 1)
> > +/* Spread amplitude (% = 0.1 * SPREAD[4:0]) */
> > +#define OLB_PCSR1_SPREAD GENMASK(9, 5)
> > +#define OLB_PCSR1_DIS_SSCG BIT(10)
> > +/* Down-spread or center-spread */
> > +#define OLB_PCSR1_DOWN_SPREAD BIT(11)
> > +#define OLB_PCSR1_FRAC_IN GENMASK(31, 12)
> > +
> > +static struct clk_hw_onecell_data *eq5c_clk_data;
> > +static struct regmap *eq5c_olb;
>
> Drop these two. No file-scope regmaps for drivers. Use private container
> structures.
I wouldn't know how to handle the two steps then. Two clocks and the clk
provider are registered at of_clk_init() using CLK_OF_DECLARE_DRIVER().
The rest is at platform device probe. Without a static, there are no
way to pass the struct clk_hw_onecell_data from one to the other.
I've looked at all clock drivers that do CLK_OF_DECLARE_DRIVER() and
register a platform driver.
- The following use a static variable:
drivers/clk/axis/clk-artpec6.c
drivers/clk/clk-aspeed.c
drivers/clk/clk-ast2600.c
drivers/clk/clk-eyeq5.c
drivers/clk/clk-gemini.c
drivers/clk/clk-milbeaut.c
drivers/clk/mediatek/clk-mt2701.c
drivers/clk/mediatek/clk-mt6797.c
drivers/clk/mediatek/clk-mt8173-infracfg.c
drivers/clk/nxp/clk-lpc18xx-creg.c
drivers/clk/ralink/clk-mt7621.c
drivers/clk/ralink/clk-mtmips.c
drivers/clk/sunxi/clk-mod0.c
drivers/clk/axis/clk-artpec6.c
- Those two declare different clock providers at init and probe:
drivers/clk/ralink/clk-mt7621.c
drivers/clk/sunxi/clk-mod0.c
- It doesn't register new clocks at probe (only resets) so no need to
share variables.
drivers/clk/ralink/clk-mtmips.c
>
> ...
>
> > +static void __init eq5c_init(struct device_node *np)
> > +{
> > + struct device_node *parent_np = of_get_parent(np);
> > + int i, ret;
> > +
> > + eq5c_clk_data = kzalloc(struct_size(eq5c_clk_data, hws, EQ5C_NB_CLKS),
> > + GFP_KERNEL);
> > + if (!eq5c_clk_data) {
> > + ret = -ENOMEM;
> > + goto err;
> > + }
> > +
> > + eq5c_clk_data->num = EQ5C_NB_CLKS;
> > +
> > + /*
> > + * Mark all clocks as deferred. We register some now and others at
> > + * platform device probe.
> > + */
> > + for (i = 0; i < EQ5C_NB_CLKS; i++)
> > + eq5c_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
> > +
> > + /*
> > + * Currently, if OLB is not available, we log an error, fail init then
>
> How it could be not available? Only with broken initcall ordering. Fix
> your initcall ordering and then simplify all this weird code.
of_syscon_register() and regmap_init_mmio() lists many reasons for
it to not be available. Am I missing something?
Thanks,
--
Théo Lebrun, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
