On 18/12/2023 18:19, Théo Lebrun wrote:
> Add the Mobileye EyeQ5 pinctrl (pinconf & pinmux) controller driver. See
> the header comment for more information on how it works. This driver is
> specific to this platform; it might grow to add later support of other
> platforms from Mobileye.
>
> Existing pins and their function live statically in the driver code
> rather than in the devicetree, see compatible match data.
>
> Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
> ---
> MAINTAINERS | 1 +
> drivers/pinctrl/Kconfig | 15 +
> drivers/pinctrl/Makefile | 1 +
> drivers/pinctrl/pinctrl-eyeq5.c | 593 ++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 610 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d8d9583a5a06..5272b61d51d5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14558,6 +14558,7 @@ F: Documentation/devicetree/bindings/reset/mobileye,eyeq5-reset.yaml
> F: arch/mips/boot/dts/mobileye/
> F: arch/mips/configs/generic/board-eyeq5.config
> F: arch/mips/generic/board-epm5.its.S
> +F: drivers/pinctrl/pinctrl-eyeq5.c
> F: drivers/reset/reset-eyeq5.c
> F: include/dt-bindings/reset/mobileye,eyeq5-reset.h
> F: include/dt-bindings/soc/mobileye,eyeq5.h
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 1de4e1edede0..e05c59116215 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -195,6 +195,21 @@ config PINCTRL_EQUILIBRIUM
> desired pin functions, configure GPIO attributes for LGM SoC pins.
> Pin muxing and pin confi
...
> +
> +struct eq5p_match {
> + unsigned int regs[EQ5P_REG_MAX];
> + const struct pinctrl_pin_desc *pins;
> + unsigned int npins;
> + const struct eq5p_function *funcs;
> + unsigned int nfuncs;
> +};
Do not declare types in the middle of the unit. This goes to the
begining of the file.
Best regards,
Krzysztof
