UART nodes have been added to the devicetree by the initial platform
support patch series. Add reset properties now that the reset node is
declared.
Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
---
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index b7da037ef324..746148eb423f 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -51,6 +51,7 @@ uart0: serial@800000 {
interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
+ resets = <&reset 0 EQ5R_D0_UART0>;
};
uart1: serial@900000 {
@@ -61,6 +62,7 @@ uart1: serial@900000 {
interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
+ resets = <&reset 0 EQ5R_D0_UART1>;
};
uart2: serial@a00000 {
@@ -71,6 +73,7 @@ uart2: serial@a00000 {
interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uart_clk>, <&occ_periph>;
clock-names = "uartclk", "apb_pclk";
+ resets = <&reset 0 EQ5R_D0_UART2>;
};
olb: olb@e00000 {
--
2.43.0
