Keguang Zhang <keguang.zhang@xxxxxxxxx> 于2023年7月29日周六 21:45写道：
>
> Add initial devicetree for Loongson-1 boards, including
> LSGZ_1B_DEV and SMARTLOONG_1C board.
> These basic DTs contain CPU, clock and core INTC.
>
> Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
> ---
> arch/mips/boot/dts/Makefile | 1 +
> arch/mips/boot/dts/loongson/Makefile | 3 +
> arch/mips/boot/dts/loongson/loongson1.dtsi | 22 ++++++
> arch/mips/boot/dts/loongson/loongson1b.dtsi | 75 +++++++++++++++++++
> arch/mips/boot/dts/loongson/loongson1c.dtsi | 29 +++++++
> arch/mips/boot/dts/loongson/lsgz_1b_dev.dts | 25 +++++++
> arch/mips/boot/dts/loongson/smartloong_1c.dts | 25 +++++++
> 7 files changed, 180 insertions(+)
> create mode 100644 arch/mips/boot/dts/loongson/loongson1.dtsi
> create mode 100644 arch/mips/boot/dts/loongson/loongson1b.dtsi
> create mode 100644 arch/mips/boot/dts/loongson/loongson1c.dtsi
> create mode 100644 arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
> create mode 100644 arch/mips/boot/dts/loongson/smartloong_1c.dts
>
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index 928f38a79dff..2e040b1ba97b 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -6,6 +6,7 @@ subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img
> subdir-$(CONFIG_MACH_INGENIC) += ingenic
> subdir-$(CONFIG_LANTIQ) += lantiq
> subdir-$(CONFIG_MACH_LOONGSON64) += loongson
> +subdir-$(CONFIG_MACH_LOONGSON32) += loongson
> subdir-$(CONFIG_SOC_VCOREIII) += mscc
> subdir-$(CONFIG_MIPS_MALTA) += mti
> subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti
> diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
> index 5c6433e441ee..9d95f1351d5f 100644
> --- a/arch/mips/boot/dts/loongson/Makefile
> +++ b/arch/mips/boot/dts/loongson/Makefile
> @@ -6,4 +6,7 @@ dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_8core_rs780e.dtb
> dtb-$(CONFIG_MACH_LOONGSON64) += loongson64g_4core_ls7a.dtb
> dtb-$(CONFIG_MACH_LOONGSON64) += loongson64v_4core_virtio.dtb
>
> +dtb-$(CONFIG_LOONGSON1B_LSGZ_DEV) += lsgz_1b_dev.dtb
> +dtb-$(CONFIG_LOONGSON1C_SMARTLOONG) += smartloong_1c.dtb
> +
> obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
> diff --git a/arch/mips/boot/dts/loongson/loongson1.dtsi b/arch/mips/boot/dts/loongson/loongson1.dtsi
> new file mode 100644
> index 000000000000..a2b5c828bbbd
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/loongson1.dtsi
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2023 Keguang Zhang <keguang.zhang@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/clock/loongson,ls1x-clk.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cpu_intc: interrupt-controller {
> + compatible = "mti,cpu-interrupt-controller";
> + #address-cells = <0>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> +};
> diff --git a/arch/mips/boot/dts/loongson/loongson1b.dtsi b/arch/mips/boot/dts/loongson/loongson1b.dtsi
> new file mode 100644
> index 000000000000..784ae9b6572d
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/loongson1b.dtsi
> @@ -0,0 +1,75 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2023 Keguang Zhang <keguang.zhang@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +#include "loongson1.dtsi"
> +
> +/ {
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + reg = <0>;
> + #clock-cells = <1>;
> + clocks = <&clkc LS1X_CLKID_CPU>;
> + operating-points-v2 = <&cpu_opp_table>;
> + };
> + };
> +
> + cpu_opp_table: opp-table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-44000000 {
> + opp-hz = /bits/ 64 <44000000>;
> + };
> + opp-47142000 {
> + opp-hz = /bits/ 64 <47142000>;
> + };
> + opp-50769000 {
> + opp-hz = /bits/ 64 <50769000>;
> + };
> + opp-55000000 {
> + opp-hz = /bits/ 64 <55000000>;
> + };
> + opp-60000000 {
> + opp-hz = /bits/ 64 <60000000>;
> + };
> + opp-66000000 {
> + opp-hz = /bits/ 64 <66000000>;
> + };
> + opp-73333000 {
> + opp-hz = /bits/ 64 <73333000>;
> + };
> + opp-82500000 {
> + opp-hz = /bits/ 64 <82500000>;
> + };
> + opp-94285000 {
> + opp-hz = /bits/ 64 <94285000>;
> + };
> + opp-110000000 {
> + opp-hz = /bits/ 64 <110000000>;
> + };
> + opp-132000000 {
> + opp-hz = /bits/ 64 <132000000>;
> + };
> + opp-165000000 {
> + opp-hz = /bits/ 64 <165000000>;
> + };
> + opp-220000000 {
> + opp-hz = /bits/ 64 <220000000>;
> + };
> + };
> +
> + clkc: clock-controller@1fe78030 {
> + compatible = "loongson,ls1b-clk";
> + reg = <0x1fe78030 0x8>;
> +
> + clocks = <&xtal>;
> + #clock-cells = <1>;
> + };
> +};
> diff --git a/arch/mips/boot/dts/loongson/loongson1c.dtsi b/arch/mips/boot/dts/loongson/loongson1c.dtsi
> new file mode 100644
> index 000000000000..d552e1668984
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/loongson1c.dtsi
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2023 Keguang Zhang <keguang.zhang@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +#include "loongson1.dtsi"
> +
> +/ {
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + reg = <0>;
> + #clock-cells = <1>;
> + clocks = <&clkc LS1X_CLKID_CPU>;
> + };
> + };
> +
> + clkc: clock-controller@1fe78030 {
> + compatible = "loongson,ls1c-clk";
> + reg = <0x1fe78030 0x8>;
> +
> + clocks = <&xtal>;
> + #clock-cells = <1>;
> + };
> +};
> diff --git a/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
> new file mode 100644
> index 000000000000..d12c723b0a2b
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2023 Keguang Zhang <keguang.zhang@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "loongson1b.dtsi"
> +
> +/ {
> + compatible = "loongson,lsgz-1b-dev", "loongson,ls1b";
> + model = "LSGZ_1B_DEV Board";
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x4000000>;
> + };
> +
> + xtal: xtal {
for your information, hope it helps:
in <devicetree-specification-v0.4.pdf> Page: 8
The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model. If appropriate,
the name should be one of the following choices:
... clock ...
> + compatible = "fixed-clock";
> + clock-frequency = <33000000>;
> + clock-output-names = "xtal";
> + #clock-cells = <0>;
> + };
> +};
> diff --git a/arch/mips/boot/dts/loongson/smartloong_1c.dts b/arch/mips/boot/dts/loongson/smartloong_1c.dts
> new file mode 100644
> index 000000000000..64e869acfd86
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/smartloong_1c.dts
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2023 Keguang Zhang <keguang.zhang@xxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "loongson1c.dtsi"
> +
> +/ {
> + compatible = "loongmasses,smartloong-1c", "loongson,ls1c";
> + model = "Smartloong_1C Board";
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x2000000>;
> + };
> +
> + xtal: xtal {
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "xtal";
> + #clock-cells = <0>;
> + };
> +};
> --
> 2.39.2
>
---
Du Huanpeng
