[PATCH 08/17] MIPS: loongson32: Convert Ethernet platform device to DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add Ethernet device nodes for Loongson-1 boards,
and drop the legacy platform devices and data accordingly.

Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
---
 arch/mips/boot/dts/loongson/loongson1.dtsi    |  16 ++
 arch/mips/boot/dts/loongson/loongson1b.dtsi   |  53 +++++++
 arch/mips/boot/dts/loongson/loongson1c.dtsi   |  17 ++
 arch/mips/boot/dts/loongson/lsgz_1b_dev.dts   |   8 +
 arch/mips/boot/dts/loongson/smartloong_1c.dts |   4 +
 arch/mips/loongson32/common/platform.c        | 146 +-----------------
 arch/mips/loongson32/ls1b/board.c             |   2 -
 arch/mips/loongson32/ls1c/board.c             |   1 -
 8 files changed, 99 insertions(+), 148 deletions(-)

diff --git a/arch/mips/boot/dts/loongson/loongson1.dtsi b/arch/mips/boot/dts/loongson/loongson1.dtsi
index c77aa2d0f66c..48bb786bbf10 100644
--- a/arch/mips/boot/dts/loongson/loongson1.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson1.dtsi
@@ -71,6 +71,22 @@ intc3: interrupt-controller@1fd01088 {
 			interrupt-parent = <&cpu_intc>;
 			interrupts = <5>;
 		};
+
+		gmac0: ethernet@1fe10000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x1fe10000 0x10000>;
+
+			interrupt-parent = <&intc1>;
+			interrupt-names = "macirq";
+
+			clocks = <&clkc LS1X_CLKID_AHB>;
+			clock-names = "stmmaceth";
+
+			snps,pbl = <1>;
+
+			status = "disabled";
+		};
+
 	};
 
 	apb: bus@1fe40000 {
diff --git a/arch/mips/boot/dts/loongson/loongson1b.dtsi b/arch/mips/boot/dts/loongson/loongson1b.dtsi
index 437a77cee163..42b96c557660 100644
--- a/arch/mips/boot/dts/loongson/loongson1b.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson1b.dtsi
@@ -7,6 +7,11 @@
 #include "loongson1.dtsi"
 
 / {
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -74,6 +79,54 @@ clkc: clock-controller@1fe78030 {
 	};
 };
 
+&ahb {
+	gmac1: ethernet@1fe20000 {
+		compatible = "snps,dwmac-3.70a";
+		reg = <0x1fe20000 0x10000>;
+
+		interrupt-parent = <&intc1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+
+		clocks = <&clkc LS1X_CLKID_AHB>;
+		clock-names = "stmmaceth";
+
+		phy-handle = <&phy1>;
+		phy-mode = "mii";
+
+		snps,pbl = <1>;
+
+		status = "disabled";
+
+		mdio1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dwmac-mdio";
+
+			phy1: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
+
 &uart1 {
 	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/mips/boot/dts/loongson/loongson1c.dtsi b/arch/mips/boot/dts/loongson/loongson1c.dtsi
index 1dd575b7b2f9..5b3e0f9280f6 100644
--- a/arch/mips/boot/dts/loongson/loongson1c.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson1c.dtsi
@@ -41,6 +41,23 @@ intc4: interrupt-controller@1fd010a0 {
 	};
 };
 
+&gmac0 {
+	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@13 {
+			reg = <0x13>;
+		};
+	};
+};
+
 &uart1 {
 	interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
index 89c3dfa574f7..a43df21f2904 100644
--- a/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
+++ b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
@@ -28,6 +28,14 @@ xtal: xtal {
 	};
 };
 
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/mips/boot/dts/loongson/smartloong_1c.dts b/arch/mips/boot/dts/loongson/smartloong_1c.dts
index 188aab9e3685..2d8f304aa2c4 100644
--- a/arch/mips/boot/dts/loongson/smartloong_1c.dts
+++ b/arch/mips/boot/dts/loongson/smartloong_1c.dts
@@ -28,6 +28,10 @@ xtal: xtal {
 	};
 };
 
+&gmac0 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index 8272b4133e25..817518531b9b 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -8,157 +8,13 @@
 #include <linux/err.h>
 #include <linux/mtd/partitions.h>
 #include <linux/sizes.h>
-#include <linux/phy.h>
-#include <linux/stmmac.h>
 #include <linux/usb/ehci_pdriver.h>
 
 #include <platform.h>
 #include <loongson1.h>
 #include <dma.h>
 #include <nand.h>
-
-/* Synopsys Ethernet GMAC */
-static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
-	.phy_mask	= 0,
-};
-
-static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
-	.pbl		= 1,
-};
-
-int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
-{
-	struct plat_stmmacenet_data *plat_dat = NULL;
-	u32 val;
-
-	val = __raw_readl(LS1X_MUX_CTRL1);
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-	plat_dat = dev_get_platdata(&pdev->dev);
-	if (plat_dat->bus_id) {
-		__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
-			     GMAC1_USE_UART0, LS1X_MUX_CTRL0);
-		switch (plat_dat->phy_interface) {
-		case PHY_INTERFACE_MODE_RGMII:
-			val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
-			break;
-		case PHY_INTERFACE_MODE_MII:
-			val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
-			break;
-		default:
-			pr_err("unsupported mii mode %d\n",
-			       plat_dat->phy_interface);
-			return -ENOTSUPP;
-		}
-		val &= ~GMAC1_SHUT;
-	} else {
-		switch (plat_dat->phy_interface) {
-		case PHY_INTERFACE_MODE_RGMII:
-			val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
-			break;
-		case PHY_INTERFACE_MODE_MII:
-			val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
-			break;
-		default:
-			pr_err("unsupported mii mode %d\n",
-			       plat_dat->phy_interface);
-			return -ENOTSUPP;
-		}
-		val &= ~GMAC0_SHUT;
-	}
-	__raw_writel(val, LS1X_MUX_CTRL1);
-#elif defined(CONFIG_LOONGSON1_LS1C)
-	plat_dat = dev_get_platdata(&pdev->dev);
-
-	val &= ~PHY_INTF_SELI;
-	if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
-		val |= 0x4 << PHY_INTF_SELI_SHIFT;
-	__raw_writel(val, LS1X_MUX_CTRL1);
-
-	val = __raw_readl(LS1X_MUX_CTRL0);
-	__raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
-#endif
-
-	return 0;
-}
-
-static struct plat_stmmacenet_data ls1x_eth0_pdata = {
-	.bus_id			= 0,
-	.phy_addr		= -1,
-#if defined(CONFIG_LOONGSON1_LS1B)
-	.phy_interface		= PHY_INTERFACE_MODE_MII,
-#elif defined(CONFIG_LOONGSON1_LS1C)
-	.phy_interface		= PHY_INTERFACE_MODE_RMII,
-#endif
-	.mdio_bus_data		= &ls1x_mdio_bus_data,
-	.dma_cfg		= &ls1x_eth_dma_cfg,
-	.has_gmac		= 1,
-	.tx_coe			= 1,
-	.rx_queues_to_use	= 1,
-	.tx_queues_to_use	= 1,
-	.init			= ls1x_eth_mux_init,
-};
-
-static struct resource ls1x_eth0_resources[] = {
-	[0] = {
-		.start	= LS1X_GMAC0_BASE,
-		.end	= LS1X_GMAC0_BASE + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "macirq",
-		.start	= LS1X_GMAC0_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device ls1x_eth0_pdev = {
-	.name		= "stmmaceth",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ls1x_eth0_resources),
-	.resource	= ls1x_eth0_resources,
-	.dev		= {
-		.platform_data = &ls1x_eth0_pdata,
-	},
-};
-
-#ifdef CONFIG_LOONGSON1_LS1B
-static struct plat_stmmacenet_data ls1x_eth1_pdata = {
-	.bus_id			= 1,
-	.phy_addr		= -1,
-	.phy_interface		= PHY_INTERFACE_MODE_MII,
-	.mdio_bus_data		= &ls1x_mdio_bus_data,
-	.dma_cfg		= &ls1x_eth_dma_cfg,
-	.has_gmac		= 1,
-	.tx_coe			= 1,
-	.rx_queues_to_use	= 1,
-	.tx_queues_to_use	= 1,
-	.init			= ls1x_eth_mux_init,
-};
-
-static struct resource ls1x_eth1_resources[] = {
-	[0] = {
-		.start	= LS1X_GMAC1_BASE,
-		.end	= LS1X_GMAC1_BASE + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "macirq",
-		.start	= LS1X_GMAC1_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device ls1x_eth1_pdev = {
-	.name		= "stmmaceth",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(ls1x_eth1_resources),
-	.resource	= ls1x_eth1_resources,
-	.dev		= {
-		.platform_data = &ls1x_eth1_pdata,
-	},
-};
-#endif	/* CONFIG_LOONGSON1_LS1B */
+#include <irq.h>
 
 /* GPIO */
 static struct resource ls1x_gpio0_resources[] = {
diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
index e8290f200096..f23e4e5c96ee 100644
--- a/arch/mips/loongson32/ls1b/board.c
+++ b/arch/mips/loongson32/ls1b/board.c
@@ -34,8 +34,6 @@ static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
 };
 
 static struct platform_device *ls1b_platform_devices[] __initdata = {
-	&ls1x_eth0_pdev,
-	&ls1x_eth1_pdev,
 	&ls1x_ehci_pdev,
 	&ls1x_gpio0_pdev,
 	&ls1x_gpio1_pdev,
diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
index a7096964fb30..29bc467fd149 100644
--- a/arch/mips/loongson32/ls1c/board.c
+++ b/arch/mips/loongson32/ls1c/board.c
@@ -6,7 +6,6 @@
 #include <platform.h>
 
 static struct platform_device *ls1c_platform_devices[] __initdata = {
-	&ls1x_eth0_pdev,
 	&ls1x_rtc_pdev,
 	&ls1x_wdt_pdev,
 };
-- 
2.39.2




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux