Re: [PATCH v7 12/12] KVM: arm64: Use TLBI range-based intructions for unmap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/25/23 00:47, Raghavendra Rao Ananta wrote:
On Mon, Jul 24, 2023 at 2:35 AM Shaoqin Huang <shahuang@xxxxxxxxxx> wrote:

Hi Raghavendra,

On 7/22/23 10:22, Raghavendra Rao Ananta wrote:
The current implementation of the stage-2 unmap walker traverses
the given range and, as a part of break-before-make, performs
TLB invalidations with a DSB for every PTE. A multitude of this
combination could cause a performance bottleneck on some systems.

Hence, if the system supports FEAT_TLBIRANGE, defer the TLB
invalidations until the entire walk is finished, and then
use range-based instructions to invalidate the TLBs in one go.
Condition deferred TLB invalidation on the system supporting FWB,
as the optimization is entirely pointless when the unmap walker
needs to perform CMOs.

Rename stage2_put_pte() to stage2_unmap_put_pte() as the function
now serves the stage-2 unmap walker specifically, rather than
acting generic.

Signed-off-by: Raghavendra Rao Ananta <rananta@xxxxxxxxxx>
---
   arch/arm64/kvm/hyp/pgtable.c | 67 +++++++++++++++++++++++++++++++-----
   1 file changed, 58 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
index 5ef098af1736..cf88933a2ea0 100644
--- a/arch/arm64/kvm/hyp/pgtable.c
+++ b/arch/arm64/kvm/hyp/pgtable.c
@@ -831,16 +831,54 @@ static void stage2_make_pte(const struct kvm_pgtable_visit_ctx *ctx, kvm_pte_t n
       smp_store_release(ctx->ptep, new);
   }

-static void stage2_put_pte(const struct kvm_pgtable_visit_ctx *ctx, struct kvm_s2_mmu *mmu,
-                        struct kvm_pgtable_mm_ops *mm_ops)
+struct stage2_unmap_data {
+     struct kvm_pgtable *pgt;
+     bool defer_tlb_flush_init;
+};
+
+static bool __stage2_unmap_defer_tlb_flush(struct kvm_pgtable *pgt)
+{
+     /*
+      * If FEAT_TLBIRANGE is implemented, defer the individual
+      * TLB invalidations until the entire walk is finished, and
+      * then use the range-based TLBI instructions to do the
+      * invalidations. Condition deferred TLB invalidation on the
+      * system supporting FWB, as the optimization is entirely
+      * pointless when the unmap walker needs to perform CMOs.
+      */
+     return system_supports_tlb_range() && stage2_has_fwb(pgt);
+}
+
+static bool stage2_unmap_defer_tlb_flush(struct stage2_unmap_data *unmap_data)
+{
+     bool defer_tlb_flush = __stage2_unmap_defer_tlb_flush(unmap_data->pgt);
+
+     /*
+      * Since __stage2_unmap_defer_tlb_flush() is based on alternative
+      * patching and the TLBIs' operations behavior depend on this,
+      * track if there's any change in the state during the unmap sequence.
+      */
+     WARN_ON(unmap_data->defer_tlb_flush_init != defer_tlb_flush);
+     return defer_tlb_flush;
+}
+
+static void stage2_unmap_put_pte(const struct kvm_pgtable_visit_ctx *ctx,
+                             struct kvm_s2_mmu *mmu,
+                             struct kvm_pgtable_mm_ops *mm_ops)
   {
+     struct stage2_unmap_data *unmap_data = ctx->arg;
+
       /*
-      * Clear the existing PTE, and perform break-before-make with
-      * TLB maintenance if it was valid.
+      * Clear the existing PTE, and perform break-before-make if it was
+      * valid. Depending on the system support, the TLB maintenance for
+      * the same can be deferred until the entire unmap is completed.
        */
       if (kvm_pte_valid(ctx->old)) {
               kvm_clear_pte(ctx->ptep);
-             kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu, ctx->addr, ctx->level);
+
+             if (!stage2_unmap_defer_tlb_flush(unmap_data))
Why not directly check (unmap_data->defer_tlb_flush_init) here?

(Re-sending the reply as the previous one was formatted as HTML and
was blocked by many lists)

No particular reason per say, but I was just going with the logic of
determining if we need to defer the flush and the WARN_ON() parts
separate.
Any advantage if we directly check in stage2_unmap_put_pte() that I
missed or is this purely for readability?

Hi Raghavendra,

I just wondering if before the stage2 walk, we want to defer the tlb flush, but if when walk the stage2, the stage2_unmap_defer_tlb_flush() trigger the WARN_ON() and return don't defer the tlb flush, it will flush the ctx->addr's tlb. But before the WARN_ON() triggered, these tlb will not be flushed, since when walk stage2 done in the kvm_pgtable_stage2_unmap(), the stage2_unmap_defer_tlb_flush() still trigger the WARN_ON() and don't use the tlb range-based flush. Thus some of the tlb are not flushed.

If we directly check the (unmap_data->defer_tlb_flush_init), this isn't change during walking the stage2, so the WARN_ON() should only trigger in kvm_pgtable_stage2_unmap()->stage2_unmap_defer_tlb_flush().

I'm not sure if it's right since I just think once we set up use the TLBI range-based flush, the result of the __stage2_unmap_defer_tlb_flush() shouldn't change. Otherwise there must have some stale TLB entry.

Thanks,
Shaoqin


+                     kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu,
+                                     ctx->addr, ctx->level);
Small indent hint. The ctx->addr can align with __kvm_tlb_flush_vmid_ipa.

Ah, yes. I'll adjust this if I send out a v8.

Thank you.
Raghavendra
Thanks,
Shaoqin
       }

       mm_ops->put_page(ctx->ptep);
@@ -1070,7 +1108,8 @@ int kvm_pgtable_stage2_set_owner(struct kvm_pgtable *pgt, u64 addr, u64 size,
   static int stage2_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,
                              enum kvm_pgtable_walk_flags visit)
   {
-     struct kvm_pgtable *pgt = ctx->arg;
+     struct stage2_unmap_data *unmap_data = ctx->arg;
+     struct kvm_pgtable *pgt = unmap_data->pgt;
       struct kvm_s2_mmu *mmu = pgt->mmu;
       struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
       kvm_pte_t *childp = NULL;
@@ -1098,7 +1137,7 @@ static int stage2_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,
        * block entry and rely on the remaining portions being faulted
        * back lazily.
        */
-     stage2_put_pte(ctx, mmu, mm_ops);
+     stage2_unmap_put_pte(ctx, mmu, mm_ops);

       if (need_flush && mm_ops->dcache_clean_inval_poc)
               mm_ops->dcache_clean_inval_poc(kvm_pte_follow(ctx->old, mm_ops),
@@ -1112,13 +1151,23 @@ static int stage2_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,

   int kvm_pgtable_stage2_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size)
   {
+     int ret;
+     struct stage2_unmap_data unmap_data = {
+             .pgt = pgt,
+             .defer_tlb_flush_init = __stage2_unmap_defer_tlb_flush(pgt),
+     };
       struct kvm_pgtable_walker walker = {
               .cb     = stage2_unmap_walker,
-             .arg    = pgt,
+             .arg    = &unmap_data,
               .flags  = KVM_PGTABLE_WALK_LEAF | KVM_PGTABLE_WALK_TABLE_POST,
       };

-     return kvm_pgtable_walk(pgt, addr, size, &walker);
+     ret = kvm_pgtable_walk(pgt, addr, size, &walker);
+     if (stage2_unmap_defer_tlb_flush(&unmap_data))
+             /* Perform the deferred TLB invalidations */
+             kvm_tlb_flush_vmid_range(pgt->mmu, addr, size);
+
+     return ret;
   }

   struct stage2_attr_data {

--
Shaoqin



--
Shaoqin




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux