Re: [RFC PATCH v11 08/29] KVM: Introduce per-page memory attributes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 20, 2023 at 04:09:12PM +0800,
Yuan Yao <yuan.yao@xxxxxxxxxxxxxxx> wrote:

> On Tue, Jul 18, 2023 at 04:44:51PM -0700, Sean Christopherson wrote:
> > From: Chao Peng <chao.p.peng@xxxxxxxxxxxxxxx>
> >
> > In confidential computing usages, whether a page is private or shared is
> > necessary information for KVM to perform operations like page fault
> > handling, page zapping etc. There are other potential use cases for
> > per-page memory attributes, e.g. to make memory read-only (or no-exec,
> > or exec-only, etc.) without having to modify memslots.
> >
> > Introduce two ioctls (advertised by KVM_CAP_MEMORY_ATTRIBUTES) to allow
> > userspace to operate on the per-page memory attributes.
> >   - KVM_SET_MEMORY_ATTRIBUTES to set the per-page memory attributes to
> >     a guest memory range.
> >   - KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES to return the KVM supported
> >     memory attributes.
> >
> > Use an xarray to store the per-page attributes internally, with a naive,
> > not fully optimized implementation, i.e. prioritize correctness over
> > performance for the initial implementation.
> >
> > Because setting memory attributes is roughly analogous to mprotect() on
> > memory that is mapped into the guest, zap existing mappings prior to
> > updating the memory attributes.  Opportunistically provide an arch hook
> > for the post-set path (needed to complete invalidation anyways) in
> > anticipation of x86 needing the hook to update metadata related to
> > determining whether or not a given gfn can be backed with various sizes
> > of hugepages.
> >
> > It's possible that future usages may not require an invalidation, e.g.
> > if KVM ends up supporting RWX protections and userspace grants _more_
> > protections, but again opt for simplicity and punt optimizations to
> > if/when they are needed.
> >
> > Suggested-by: Sean Christopherson <seanjc@xxxxxxxxxx>
> > Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@xxxxxxxxxx
> > Cc: Fuad Tabba <tabba@xxxxxxxxxx>
> > Signed-off-by: Chao Peng <chao.p.peng@xxxxxxxxxxxxxxx>
> > Co-developed-by: Sean Christopherson <seanjc@xxxxxxxxxx>
> > Signed-off-by: Sean Christopherson <seanjc@xxxxxxxxxx>
> > ---
> >  Documentation/virt/kvm/api.rst |  60 ++++++++++++
> >  include/linux/kvm_host.h       |  14 +++
> >  include/uapi/linux/kvm.h       |  14 +++
> >  virt/kvm/Kconfig               |   4 +
> >  virt/kvm/kvm_main.c            | 170 +++++++++++++++++++++++++++++++++
> >  5 files changed, 262 insertions(+)
> >
> > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> > index 34d4ce66e0c8..0ca8561775ac 100644
> > --- a/Documentation/virt/kvm/api.rst
> > +++ b/Documentation/virt/kvm/api.rst
> > @@ -6068,6 +6068,56 @@ writes to the CNTVCT_EL0 and CNTPCT_EL0 registers using the SET_ONE_REG
> >  interface. No error will be returned, but the resulting offset will not be
> >  applied.
> >
> > +4.139 KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES
> > +-----------------------------------------
> > +
> > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES
> > +:Architectures: x86
> > +:Type: vm ioctl
> > +:Parameters: u64 memory attributes bitmask(out)
> > +:Returns: 0 on success, <0 on error
> > +
> > +Returns supported memory attributes bitmask. Supported memory attributes will
> > +have the corresponding bits set in u64 memory attributes bitmask.
> > +
> > +The following memory attributes are defined::
> > +
> > +  #define KVM_MEMORY_ATTRIBUTE_PRIVATE           (1ULL << 3)
> > +
> > +4.140 KVM_SET_MEMORY_ATTRIBUTES
> > +-----------------------------------------
> > +
> > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES
> > +:Architectures: x86
> > +:Type: vm ioctl
> > +:Parameters: struct kvm_memory_attributes(in/out)
> > +:Returns: 0 on success, <0 on error
> > +
> > +Sets memory attributes for pages in a guest memory range. Parameters are
> > +specified via the following structure::
> > +
> > +  struct kvm_memory_attributes {
> > +	__u64 address;
> > +	__u64 size;
> > +	__u64 attributes;
> > +	__u64 flags;
> > +  };
> > +
> > +The user sets the per-page memory attributes to a guest memory range indicated
> > +by address/size, and in return KVM adjusts address and size to reflect the
> > +actual pages of the memory range have been successfully set to the attributes.
> > +If the call returns 0, "address" is updated to the last successful address + 1
> > +and "size" is updated to the remaining address size that has not been set
> > +successfully. The user should check the return value as well as the size to
> > +decide if the operation succeeded for the whole range or not. The user may want
> > +to retry the operation with the returned address/size if the previous range was
> > +partially successful.
> > +
> > +Both address and size should be page aligned and the supported attributes can be
> > +retrieved with KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES.
> > +
> > +The "flags" field may be used for future extensions and should be set to 0s.
> > +
> >  5. The kvm_run structure
> >  ========================
> >
> > @@ -8494,6 +8544,16 @@ block sizes is exposed in KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES as a
> >  64-bit bitmap (each bit describing a block size). The default value is
> >  0, to disable the eager page splitting.
> >
> > +8.41 KVM_CAP_MEMORY_ATTRIBUTES
> > +------------------------------
> > +
> > +:Capability: KVM_CAP_MEMORY_ATTRIBUTES
> > +:Architectures: x86
> > +:Type: vm
> > +
> > +This capability indicates KVM supports per-page memory attributes and ioctls
> > +KVM_GET_SUPPORTED_MEMORY_ATTRIBUTES/KVM_SET_MEMORY_ATTRIBUTES are available.
> > +
> >  9. Known KVM API problems
> >  =========================
> >
> > diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
> > index e9ca49d451f3..97db63da6227 100644
> > --- a/include/linux/kvm_host.h
> > +++ b/include/linux/kvm_host.h
> > @@ -264,6 +264,7 @@ struct kvm_gfn_range {
> >  	gfn_t end;
> >  	union {
> >  		pte_t pte;
> > +		unsigned long attributes;
> >  		u64 raw;
> >  	} arg;
> >  	bool may_block;
> > @@ -809,6 +810,9 @@ struct kvm {
> >
> >  #ifdef CONFIG_HAVE_KVM_PM_NOTIFIER
> >  	struct notifier_block pm_notifier;
> > +#endif
> > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES
> > +	struct xarray mem_attr_array;
> >  #endif
> >  	char stats_id[KVM_STATS_NAME_SIZE];
> >  };
> > @@ -2301,4 +2305,14 @@ static inline void kvm_account_pgtable_pages(void *virt, int nr)
> >  /* Max number of entries allowed for each kvm dirty ring */
> >  #define  KVM_DIRTY_RING_MAX_ENTRIES  65536
> >
> > +#ifdef CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES
> > +static inline unsigned long kvm_get_memory_attributes(struct kvm *kvm, gfn_t gfn)
> > +{
> > +	return xa_to_value(xa_load(&kvm->mem_attr_array, gfn));
> > +}
> > +
> > +bool kvm_arch_post_set_memory_attributes(struct kvm *kvm,
> > +					 struct kvm_gfn_range *range);
> 
> Used but no definition in this patch, it's defined in next patch 09.
> How about add weak version in this patch and let ARCHs to overide it ?

It is guarded by CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES.
-- 
Isaku Yamahata <isaku.yamahata@xxxxxxxxx>



[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux