From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
Make dwc3_octeon_clocks_start just start the clocks.
Signed-off-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
---
CHANGES:
-v2: if else block bracket according CodingStyle
drivers/usb/dwc3/dwc3-octeon.c | 148 ++++++++++++++++-----------------
1 file changed, 71 insertions(+), 77 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-octeon.c b/drivers/usb/dwc3/dwc3-octeon.c
index 8d5facd881c1..668f6d3490b1 100644
--- a/drivers/usb/dwc3/dwc3-octeon.c
+++ b/drivers/usb/dwc3/dwc3-octeon.c
@@ -300,67 +300,14 @@ static int dwc3_octeon_config_power(struct device *dev, void __iomem *base)
return 0;
}
-static int dwc3_octeon_clocks_start(struct device *dev, void __iomem *base)
+static int dwc3_octeon_clocks_start(struct device *dev, void __iomem *base,
+ int ref_clk_sel, int ref_clk_fsel,
+ int mpll_mul)
{
- int i, div, mpll_mul, ref_clk_fsel, ref_clk_sel = 2;
- u32 clock_rate;
+ int div;
u64 val;
void __iomem *uctl_ctl_reg = base + USBDRD_UCTL_CTL;
- if (dev->of_node) {
- const char *ss_clock_type;
- const char *hs_clock_type;
-
- i = of_property_read_u32(dev->of_node,
- "refclk-frequency", &clock_rate);
- if (i) {
- dev_err(dev, "No UCTL \"refclk-frequency\"\n");
- return -EINVAL;
- }
- i = of_property_read_string(dev->of_node,
- "refclk-type-ss", &ss_clock_type);
- if (i) {
- dev_err(dev, "No UCTL \"refclk-type-ss\"\n");
- return -EINVAL;
- }
- i = of_property_read_string(dev->of_node,
- "refclk-type-hs", &hs_clock_type);
- if (i) {
- dev_err(dev, "No UCTL \"refclk-type-hs\"\n");
- return -EINVAL;
- }
- if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
- if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0)
- ref_clk_sel = 0;
- else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
- ref_clk_sel = 2;
- else
- dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
- hs_clock_type);
- } else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
- if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0)
- ref_clk_sel = 1;
- else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
- ref_clk_sel = 3;
- else {
- dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
- hs_clock_type);
- ref_clk_sel = 3;
- }
- } else
- dev_warn(dev, "Invalid SS clock type %s, using dlmc_ref_clk0 instead\n",
- ss_clock_type);
-
- if ((ref_clk_sel == 0 || ref_clk_sel == 1) &&
- (clock_rate != 100000000))
- dev_warn(dev, "Invalid UCTL clock rate of %u, using 100000000 instead\n",
- clock_rate);
-
- } else {
- dev_err(dev, "No USB UCTL device node\n");
- return -EINVAL;
- }
-
/*
* Step 1: Wait for all voltages to be stable...that surely
* happened before starting the kernel. SKIP
@@ -404,24 +351,6 @@ static int dwc3_octeon_clocks_start(struct device *dev, void __iomem *base)
val &= ~USBDRD_UCTL_CTL_REF_CLK_SEL;
val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_SEL, ref_clk_sel);
- ref_clk_fsel = 0x07;
- switch (clock_rate) {
- default:
- dev_warn(dev, "Invalid ref_clk %u, using 100000000 instead\n",
- clock_rate);
- fallthrough;
- case 100000000:
- mpll_mul = 0x19;
- if (ref_clk_sel < 2)
- ref_clk_fsel = 0x27;
- break;
- case 50000000:
- mpll_mul = 0x32;
- break;
- case 125000000:
- mpll_mul = 0x28;
- break;
- }
val &= ~USBDRD_UCTL_CTL_REF_CLK_FSEL;
val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_FSEL, ref_clk_fsel);
@@ -505,8 +434,72 @@ static void __init dwc3_octeon_phy_reset(void __iomem *base)
static int dwc3_octeon_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
struct dwc3_data *data;
- int err;
+ int err, ref_clk_sel, ref_clk_fsel, mpll_mul;
+ uint32_t clock_rate;
+ const char *hs_clock_type, *ss_clock_type;
+
+ if (!node) {
+ dev_err(dev, "No USB UCTL device node\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(node, "refclk-frequency", &clock_rate)) {
+ dev_err(dev, "No UCTL \"refclk-frequency\"\n");
+ return -EINVAL;
+ }
+ if (of_property_read_string(node, "refclk-type-ss", &ss_clock_type)) {
+ dev_err(dev, "No UCTL \"refclk-type-ss\"\n");
+ return -EINVAL;
+ }
+ if (of_property_read_string(node, "refclk-type-hs", &hs_clock_type)) {
+ dev_err(dev, "No UCTL \"refclk-type-hs\"\n");
+ return -EINVAL;
+ }
+
+ ref_clk_sel = 2;
+ if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
+ if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0)
+ ref_clk_sel = 0;
+ else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
+ ref_clk_sel = 2;
+ else
+ dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
+ hs_clock_type);
+ } else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
+ if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0)
+ ref_clk_sel = 1;
+ else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) {
+ ref_clk_sel = 3;
+ } else {
+ dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
+ hs_clock_type);
+ ref_clk_sel = 3;
+ }
+ } else {
+ dev_warn(dev, "Invalid SS clock type %s, using dlmc_ref_clk0 instead\n",
+ ss_clock_type);
+ }
+
+ ref_clk_fsel = 0x07;
+ switch (clock_rate) {
+ default:
+ dev_warn(dev, "Invalid ref_clk %u, using 100000000 instead\n",
+ clock_rate);
+ fallthrough;
+ case 100000000:
+ mpll_mul = 0x19;
+ if (ref_clk_sel < 2)
+ ref_clk_fsel = 0x27;
+ break;
+ case 50000000:
+ mpll_mul = 0x32;
+ break;
+ case 125000000:
+ mpll_mul = 0x28;
+ break;
+ }
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
@@ -516,7 +509,8 @@ static int dwc3_octeon_probe(struct platform_device *pdev)
if (IS_ERR(data->base))
return PTR_ERR(data->base);
- err = dwc3_octeon_clocks_start(dev, data->base);
+ err = dwc3_octeon_clocks_start(dev, data->base,
+ ref_clk_sel, ref_clk_fsel, mpll_mul);
if (err)
return err;
--
2.39.2
