On Mon, Jun 19, 2023, Ladislav Michl wrote:
> From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
>
> Make dwc3_octeon_clocks_start just start the clocks.
>
> Signed-off-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
> ---
> drivers/usb/dwc3/dwc3-octeon.c | 150 ++++++++++++++++-----------------
> 1 file changed, 71 insertions(+), 79 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-octeon.c b/drivers/usb/dwc3/dwc3-octeon.c
> index 3ebcf2a61233..4ad2d8887cf0 100644
> --- a/drivers/usb/dwc3/dwc3-octeon.c
> +++ b/drivers/usb/dwc3/dwc3-octeon.c
> @@ -295,67 +295,14 @@ static int dwc3_octeon_config_power(struct device *dev, void __iomem *base)
> return 0;
> }
>
> -static int dwc3_octeon_clocks_start(struct device *dev, void __iomem *base)
> +static int dwc3_octeon_clocks_start(struct device *dev, void __iomem *base,
> + int ref_clk_sel, int ref_clk_fsel,
> + int mpll_mul)
> {
> - int i, div, mpll_mul, ref_clk_fsel, ref_clk_sel = 2;
> - u32 clock_rate;
> + int div;
> u64 val;
> void __iomem *uctl_ctl_reg = base + USBDRD_UCTL_CTL;
>
> - if (dev->of_node) {
> - const char *ss_clock_type;
> - const char *hs_clock_type;
> -
> - i = of_property_read_u32(dev->of_node,
> - "refclk-frequency", &clock_rate);
> - if (i) {
> - dev_err(dev, "No UCTL \"refclk-frequency\"\n");
> - return -EINVAL;
> - }
> - i = of_property_read_string(dev->of_node,
> - "refclk-type-ss", &ss_clock_type);
> - if (i) {
> - dev_err(dev, "No UCTL \"refclk-type-ss\"\n");
> - return -EINVAL;
> - }
> - i = of_property_read_string(dev->of_node,
> - "refclk-type-hs", &hs_clock_type);
> - if (i) {
> - dev_err(dev, "No UCTL \"refclk-type-hs\"\n");
> - return -EINVAL;
> - }
> - if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
> - if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0)
> - ref_clk_sel = 0;
> - else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
> - ref_clk_sel = 2;
> - else
> - dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
> - hs_clock_type);
> - } else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
> - if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0)
> - ref_clk_sel = 1;
> - else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
> - ref_clk_sel = 3;
> - else {
> - dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
> - hs_clock_type);
> - ref_clk_sel = 3;
> - }
> - } else
> - dev_warn(dev, "Invalid SS clock type %s, using dlmc_ref_clk0 instead\n",
> - ss_clock_type);
> -
> - if ((ref_clk_sel == 0 || ref_clk_sel == 1) &&
> - (clock_rate != 100000000))
> - dev_warn(dev, "Invalid UCTL clock rate of %u, using 100000000 instead\n",
> - clock_rate);
> -
> - } else {
> - dev_err(dev, "No USB UCTL device node\n");
> - return -EINVAL;
> - }
> -
> /*
> * Step 1: Wait for all voltages to be stable...that surely
> * happened before starting the kernel. SKIP
> @@ -399,24 +346,6 @@ static int dwc3_octeon_clocks_start(struct device *dev, void __iomem *base)
> val &= ~USBDRD_UCTL_CTL_REF_CLK_SEL;
> val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_SEL, ref_clk_sel);
>
> - ref_clk_fsel = 0x07;
> - switch (clock_rate) {
> - default:
> - dev_warn(dev, "Invalid ref_clk %u, using 100000000 instead\n",
> - clock_rate);
> - fallthrough;
> - case 100000000:
> - mpll_mul = 0x19;
> - if (ref_clk_sel < 2)
> - ref_clk_fsel = 0x27;
> - break;
> - case 50000000:
> - mpll_mul = 0x32;
> - break;
> - case 125000000:
> - mpll_mul = 0x28;
> - break;
> - }
> val &= ~USBDRD_UCTL_CTL_REF_CLK_FSEL;
> val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_FSEL, ref_clk_fsel);
>
> @@ -502,8 +429,72 @@ static void __init dwc3_octeon_phy_reset(void __iomem *base)
> static int dwc3_octeon_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> struct dwc3_data *data;
> - int err;
> + int err, ref_clk_sel, ref_clk_fsel, mpll_mul;
> + uint32_t clock_rate;
> + const char *hs_clock_type, *ss_clock_type;
> +
> + if (!node) {
> + dev_err(dev, "No USB UCTL device node\n");
> + return -EINVAL;
> + }
> +
> + if (of_property_read_u32(node, "refclk-frequency", &clock_rate)) {
> + dev_err(dev, "No UCTL \"refclk-frequency\"\n");
> + return -EINVAL;
> + }
> + if (of_property_read_string(node, "refclk-type-ss", &ss_clock_type)) {
> + dev_err(dev, "No UCTL \"refclk-type-ss\"\n");
> + return -EINVAL;
> + }
> + if (of_property_read_string(node, "refclk-type-hs", &hs_clock_type)) {
> + dev_err(dev, "No UCTL \"refclk-type-hs\"\n");
> + return -EINVAL;
> + }
> +
> + ref_clk_sel = 2;
Can we use macro instead of magic numbers?
> + if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
> + if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0)
> + ref_clk_sel = 0;
> + else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
> + ref_clk_sel = 2;
> + else
> + dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
> + hs_clock_type);
> + } else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
> + if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0)
> + ref_clk_sel = 1;
> + else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
> + ref_clk_sel = 3;
Please run checkpatch and fix minor formatting issues such as bracket
here.
> + else {
> + dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
> + hs_clock_type);
> + ref_clk_sel = 3;
> + }
> + } else {
> + dev_warn(dev, "Invalid SS clock type %s, using dlmc_ref_clk0 instead\n",
> + ss_clock_type);
> + }
> +
> + ref_clk_fsel = 0x07;
> + switch (clock_rate) {
> + default:
> + dev_warn(dev, "Invalid ref_clk %u, using 100000000 instead\n",
> + clock_rate);
> + fallthrough;
> + case 100000000:
> + mpll_mul = 0x19;
> + if (ref_clk_sel < 2)
> + ref_clk_fsel = 0x27;
> + break;
> + case 50000000:
> + mpll_mul = 0x32;
> + break;
> + case 125000000:
> + mpll_mul = 0x28;
> + break;
> + }
>
> data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> if (!data)
> @@ -516,7 +507,8 @@ static int dwc3_octeon_probe(struct platform_device *pdev)
> if (IS_ERR(data->base))
> return PTR_ERR(data->base);
>
> - err = dwc3_octeon_clocks_start(dev, data->base);
> + err = dwc3_octeon_clocks_start(dev, data->base,
> + ref_clk_sel, ref_clk_fsel, mpll_mul);
> if (err)
> return err;
>
> --
> 2.39.2
>
Thanks,
Thinh
