[PATCH] irq-bcm6345-l1: do not assume a fixed block to cpu mapping

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


The irq to block mapping is fixed, and interrupts from the first block
will always be routed to the first parent IRQ. But the parent interrupts
themselves can be routed to any available CPU.

This is used by the bootloader to map the first parent interrupt to the
boot CPU, regardless wether the boot CPU is the first one or the second

When booting from the second CPU, the assumption that the first block's
IRQ is mapped to the first CPU breaks, and the system hangs because
interrupts do not get routed correctly.

Fix this by passing the appropriate bcm6434_l1_cpu to the interrupt
handler instead of the chip itself, so the handler always has the right

Fixes: c7c42ec2baa1 ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
 drivers/irqchip/irq-bcm6345-l1.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/irqchip/irq-bcm6345-l1.c b/drivers/irqchip/irq-bcm6345-l1.c
index fa113cb2529a..6341c0167c4a 100644
--- a/drivers/irqchip/irq-bcm6345-l1.c
+++ b/drivers/irqchip/irq-bcm6345-l1.c
@@ -82,6 +82,7 @@ struct bcm6345_l1_chip {
 struct bcm6345_l1_cpu {
+	struct bcm6345_l1_chip	*intc;
 	void __iomem		*map_base;
 	unsigned int		parent_irq;
 	u32			enable_cache[];
@@ -115,17 +116,11 @@ static inline unsigned int cpu_for_irq(struct bcm6345_l1_chip *intc,
 static void bcm6345_l1_irq_handle(struct irq_desc *desc)
-	struct bcm6345_l1_chip *intc = irq_desc_get_handler_data(desc);
-	struct bcm6345_l1_cpu *cpu;
+	struct bcm6345_l1_cpu *cpu = irq_desc_get_handler_data(desc);
+	struct bcm6345_l1_chip *intc = cpu->intc;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned int idx;
-#ifdef CONFIG_SMP
-	cpu = intc->cpus[cpu_logical_map(smp_processor_id())];
-	cpu = intc->cpus[0];
 	chained_irq_enter(chip, desc);
 	for (idx = 0; idx < intc->n_words; idx++) {
@@ -253,6 +248,7 @@ static int __init bcm6345_l1_init_one(struct device_node *dn,
 	if (!cpu)
 		return -ENOMEM;
+	cpu->intc = intc;
 	cpu->map_base = ioremap(res.start, sz);
 	if (!cpu->map_base)
 		return -ENOMEM;
@@ -271,7 +267,7 @@ static int __init bcm6345_l1_init_one(struct device_node *dn,
 		return -EINVAL;
-						bcm6345_l1_irq_handle, intc);
+						bcm6345_l1_irq_handle, cpu);
 	return 0;

[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux