[PATCH 1/2] mips: pci-mt7620: do not print NFTS register value as error log

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



These codes are used to read NFTS_TIMEOUT_DELAY register value and
write it into kernel log after writing the register. they are only
used for debugging during driver development, so there is no need
to keep them now.

Tested on MT7628AN router Motorola MWR03.

Signed-off-by: Shiji Yang <yangshiji66@xxxxxxxxxxx>
---
 arch/mips/pci/pci-mt7620.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c
index 2700d75d4..df3347643 100644
--- a/arch/mips/pci/pci-mt7620.c
+++ b/arch/mips/pci/pci-mt7620.c
@@ -274,9 +274,6 @@ static int mt7628_pci_hw_init(struct platform_device *pdev)
 	val |= 0x50 << 8;
 	pci_config_write(NULL, 0, 0x70c, 4, val);
 
-	pci_config_read(NULL, 0, 0x70c, 4, &val);
-	dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
-
 	return 0;
 }
 
-- 
2.30.2




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux