On Tue, Jun 06, 2023 at 10:15:58PM +0100, Liviu Dudau wrote: > Add device tree and bindings for the TP-Link HC220 G5 v1 wireless AP, > a consumer product from TP-Link based on MT7621. > > Changes since v3: > - Turns out that adding sub-nodes to the pcie invites more warnings from > dtbs_check so we're dropping those > - Running dtbs_check made me realise that I need to re-order the patches > so that the bindings are introduced first. Hence the major change in v4 > is the re-ordering of patches > - Renamed the LEDs nodes to match the schema. > > Changes since v2: > - Remove WIP nodes for NAND flash that accidentally got included in v2 > - Fix commit message with the actual 5GHz WiFi chip name > - Remove gmac and mdio nodes from device tree as defaults are sufficient > - Added sub-nodes under pcie for each of the WiFi chip with appropriate > compatible string. > - Collect Acks received for the device tree bindings patch > > Changes since v1: > - Changed compatible for the board to "tplink,hc220-g5-v1" > - Updated the DSA switch nodes to better reflect actual usage. > - Disabled the fixed-link in gmac1 > - Added device tree bindings in Documentation/ > > v3: https://lore.kernel.org/linux-mips/20230605150114.601102-1-liviu@xxxxxxxxxxx/ > v2: https://lore.kernel.org/linux-mips/20230529150833.526084-1-liviu@xxxxxxxxxxx/ > v1: https://lore.kernel.org/linux-mips/20230509200125.309026-1-liviu@xxxxxxxxxxx/ > > Liviu Dudau (2): > dt-bindings: mips: Add bindings for TP-Link HC220 G5 v1 board > mips: dts: ralink: Add support for TP-Link HC220 G5 v1 board > > .../devicetree/bindings/mips/ralink.yaml | 1 + > arch/mips/boot/dts/ralink/Makefile | 3 +- > .../dts/ralink/mt7621-tplink-hc220-g5-v1.dts | 84 +++++++++++++++++++ > 3 files changed, 87 insertions(+), 1 deletion(-) > create mode 100644 arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts > > -- > 2.40.1 series applied to mips-next. Thomas. -- Crap can work. Given enough thrust pigs will fly, but it's not necessarily a good idea. [ RFC1925, 2.3 ]
