Re: [PATCH v3 07/65] clk: at91: sckc: Add a determine_rate hook

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04.04.2023 13:10, Maxime Ripard wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> The SAM9x5 slow clock implements a mux with a set_parent hook, but
> doesn't provide a determine_rate implementation.
> 
> This is a bit odd, since set_parent() is there to, as its name implies,
> change the parent of a clock. However, the most likely candidate to
> trigger that parent change is a call to clk_set_rate(), with
> determine_rate() figuring out which parent is the best suited for a
> given rate.
> 
> The other trigger would be a call to clk_set_parent(), but it's far less
> used, and it doesn't look like there's any obvious user for that clock.
> 
> So, the set_parent hook is effectively unused, possibly because of an
> oversight. However, it could also be an explicit decision by the
> original author to avoid any reparenting but through an explicit call to
> clk_set_parent().
> 
> The latter case would be equivalent to setting the flag
> CLK_SET_RATE_NO_REPARENT, together with setting our determine_rate hook
> to __clk_mux_determine_rate(). Indeed, if no determine_rate
> implementation is provided, clk_round_rate() (through
> clk_core_round_rate_nolock()) will call itself on the parent if
> CLK_SET_RATE_PARENT is set, and will not change the clock rate
> otherwise. __clk_mux_determine_rate() has the exact same behavior when
> CLK_SET_RATE_NO_REPARENT is set.
> 
> And if it was an oversight, then we are at least explicit about our
> behavior now and it can be further refined down the line.
> 
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>

Reviewed-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

Tested-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>

> ---
>  drivers/clk/at91/sckc.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c
> index fdc9b669f8a7..9c42961a8a2f 100644
> --- a/drivers/clk/at91/sckc.c
> +++ b/drivers/clk/at91/sckc.c
> @@ -310,6 +310,7 @@ static u8 clk_sam9x5_slow_get_parent(struct clk_hw *hw)
>  }
> 
>  static const struct clk_ops sam9x5_slow_ops = {
> +       .determine_rate = __clk_mux_determine_rate,
>         .set_parent = clk_sam9x5_slow_set_parent,
>         .get_parent = clk_sam9x5_slow_get_parent,
>  };
> @@ -337,7 +338,7 @@ at91_clk_register_sam9x5_slow(void __iomem *sckcr,
>         init.ops = &sam9x5_slow_ops;
>         init.parent_names = parent_names;
>         init.num_parents = num_parents;
> -       init.flags = 0;
> +       init.flags = CLK_SET_RATE_NO_REPARENT;
> 
>         slowck->hw.init = &init;
>         slowck->sckcr = sckcr;
> 
> --
> 2.39.2
> 





[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux