Various fixes for the Au1200/Au1550/Au1300 DBDMA2 code: - skip cache invalidation if chip has working coherency circuitry. - invalidate KSEG0-portion of the (physical) data address. - force the dma channel doorbell write out to bus immediately with a sync. -- This fixes Audio and SD/MMC on the DB1300 board. Signed-off-by: Manuel Lauss <manuel.lauss@xxxxxxxxx> --- arch/mips/alchemy/common/dbdma.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 5ab043000409..6a3c890f7bbf 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -30,6 +30,7 @@ * */ +#include <linux/dma-map-ops.h> /* for dma_default_coherent */ #include <linux/init.h> #include <linux/kernel.h> #include <linux/slab.h> @@ -623,17 +624,18 @@ u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) dp->dscr_cmd0 &= ~DSCR_CMD0_IE; /* - * There is an errata on the Au1200/Au1550 parts that could result - * in "stale" data being DMA'ed. It has to do with the snoop logic on - * the cache eviction buffer. DMA_NONCOHERENT is on by default for - * these parts. If it is fixed in the future, these dma_cache_inv will - * just be nothing more than empty macros. See io.h. + * There is an erratum on certain Au1200/Au1550 revisions that could + * result in "stale" data being DMA'ed. It has to do with the snoop + * logic on the cache eviction buffer. dma_default_coherent is set + * to false on these parts. */ - dma_cache_wback_inv((unsigned long)buf, nbytes); + if (!dma_default_coherent) + dma_cache_wback_inv(KSEG0ADDR(buf), nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ wmb(); /* drain writebuffer */ dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); ctp->chan_ptr->ddma_dbell = 0; + wmb(); /* force doorbell write out to dma engine */ /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); @@ -685,17 +687,18 @@ u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); #endif /* - * There is an errata on the Au1200/Au1550 parts that could result in - * "stale" data being DMA'ed. It has to do with the snoop logic on the - * cache eviction buffer. DMA_NONCOHERENT is on by default for these - * parts. If it is fixed in the future, these dma_cache_inv will just - * be nothing more than empty macros. See io.h. + * There is an erratum on certain Au1200/Au1550 revisions that could + * result in "stale" data being DMA'ed. It has to do with the snoop + * logic on the cache eviction buffer. dma_default_coherent is set + * to false on these parts. */ - dma_cache_inv((unsigned long)buf, nbytes); + if (!dma_default_coherent) + dma_cache_inv(KSEG0ADDR(buf), nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ wmb(); /* drain writebuffer */ dma_cache_wback_inv((unsigned long)dp, sizeof(*dp)); ctp->chan_ptr->ddma_dbell = 0; + wmb(); /* force doorbell write out to dma engine */ /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); -- 2.40.1
