On Tue, Apr 18, 2023 at 11:03 AM Sergio Paracuellos
<sergio.paracuellos@xxxxxxxxx> wrote:
>
> Hi all!
>
> This patchset is a big effort to properly implement a clock and reset
> driver for old ralink SoCs. This allow to properly define clocks in
> device tree and avoid to use fixed-clocks directly from 'arch/mips/ralink'
> architecture directory code.
>
> Device tree 'sysc' node will be both clock and reset provider using
> 'clock-cells' and 'reset-cells' properties.
>
> The ralink SoCs we are taking about are RT2880, RT3050, RT3052, RT3350,
> RT3352, RT3883, RT5350, MT7620, MT7628 and MT7688. Mostly the code in
> this new driver has been extracted from 'arch/mips/ralink' and cleanly
> put using kernel clock and reset driver APIs. The clock plans for this
> SoCs only talks about relation between CPU frequency and BUS frequency.
> This relation is different depending on the particular SoC. CPU clock is
> derived from XTAL frequencies.
>
> Depending on the SoC we have the following frequencies:
> * RT2880 SoC:
> - XTAL: 40 MHz.
> - CPU: 250, 266, 280 or 300 MHz.
> - BUS: CPU / 2 MHz.
> * RT3050, RT3052, RT3350:
> - XTAL: 40 MHz.
> - CPU: 320 or 384 MHz.
> - BUS: CPU / 3 MHz.
> * RT3352:
> - XTAL: 40 MHz.
> - CPU: 384 or 400 MHz.
> - BUS: CPU / 3 MHz.
> - PERIPH: 40 MHz.
> * RT3383:
> - XTAL: 40 MHz.
> - CPU: 250, 384, 480 or 500 MHz.
> - BUS: Depends on RAM Type and CPU:
> + RAM DDR2: 125. ELSE 83 MHz.
> + RAM DDR2: 128. ELSE 96 MHz.
> + RAM DDR2: 160. ELSE 120 MHz.
> + RAM DDR2: 166. ELSE 125 MHz.
> * RT5350:
> - XTAL: 40 MHz.
> - CPU: 300, 320 or 360 MHz.
> - BUS: CPU / 3, CPU / 4, CPU / 3 MHz.
> - PERIPH: 40 MHz.
> * MT7628 and MT7688:
> - XTAL: 20 MHz or 40 MHz.
> - CPU: 575 or 580 MHz.
> - BUS: CPU / 3.
> - PCMI2S: 480 MHz.
> - PERIPH: 40 MHz.
> * MT7620:
> - XTAL: 20 MHz or 40 MHz.
> - PLL: XTAL, 480, 600 MHz.
> - CPU: depends on PLL and some mult and dividers.
> - BUS: depends on PLL and some mult and dividers.
> - PERIPH: 40 or XTAL MHz.
>
> MT7620 is a bit more complex deriving CPU clock from a PLL and an bunch of
> register reads and predividers. To derive CPU and BUS frequencies in the
> MT7620 SoC 'mt7620_calc_rate()' helper is used.
> In the case XTAL can have different frequencies and we need a different
> clock frequency for peripherals 'periph' clock in introduced.
> The rest of the peripherals present in the SoC just follow their parent
> frequencies.
>
> I am using 'mtmips' inside for ralink clock driver. This is aligned with
> pinctrl series recently merged through pinctrl git tree [0].
>
> I am maintaining ralink as prefix for compatible strings after discussions
> between Rob and Arinc in v2 of this series [1].
>
> Changes have been compile tested for:
> - RT2880
> - RT3883
> - MT7620
>
> Changes have been properly tested in RT5350 SoC based board (ALL5003 board)
> resulting in a working platform.
>
> Dts files for these SoCs in-tree except MT7621 are incomplete. We are
> planning to align with openWRT files at some point and add extra needed
> changes. Hence I am not touching them at all in these series. If this is
> a problem, please let me know and I will update them.
>
> Talking about merging this series I'd like all of the patches going through
> the MIPS tree if possible.
>
> Thanks in advance for your time.
>
> Best regards,
> Sergio Paracuellos
>
> Changes in v3:
> - Address Stephen comments in v2:
> + Drop unsused include '<linux/clk.h>'.
> + Add fixed and factor clocks when it makes sense.
> + Make 'mtmips_periph_clk_ops' named variable.
> + WARN_ON -> WARN_ON_ONCE.
> + Avoid CONFIG_USB dependent code. Introduce new 'mtmips_clk_regs_init'.
> + Don't validate the bindings in the driver.
> + Make const 'struct clk_init_data' used inside macros.
> + do_div -> div_u64.
> + Make use of dev_err_probe.
Hi Stephen,
Does anything else need to be addressed to have all of these added?
Philipp, can you please review the reset related code in PATCH 2/9 of
these series?
Thanks in advance for your time!
Best regards,
Sergio Paracuellos
>
> Changes in v2:
> - Address bindings documentation changes pointed out by Krzysztof:
> + Rename the file into 'mediatek,mtmips-sysc.yaml'.
> + Redo commit subject and log message.
> + Order compatibles alphabetically.
> + Redo bindings description taking into account this is a system
> controller node which provides both clocks and resets to the world.
> + Drop label from example.
> + Use 'syscon' as node name in example.
> + Drop no sense 'ralink,rt2880-reset' compatible string
> - Squash patches 6 and 7 together as pointed out by Stephen Boyd.
>
> Previoous series:
> v2: https://lore.kernel.org/linux-clk/CAMhs-H-BfZb3mD8E=LeJ4vT22uibQ1DnaZsfTrtRxSiv=8L5RA@xxxxxxxxxxxxxx/T/#t
> v1: https://lore.kernel.org/linux-clk/20230320161823.1424278-1-sergio.paracuellos@xxxxxxxxx/T/#t
>
> [0]: https://lore.kernel.org/linux-gpio/e9e6ad87-2db5-9767-ff39-64a302b06185@xxxxxxxxxx/T/#t
> [1]: https://lore.kernel.org/linux-clk/CAMhs-H-BfZb3mD8E=LeJ4vT22uibQ1DnaZsfTrtRxSiv=8L5RA@xxxxxxxxxxxxxx/T/#mfe725b6e3382c6fb09736472a846cbbc84f264dc
>
> Sergio Paracuellos (9):
> dt-bindings: clock: add mtmips SoCs system controller
> clk: ralink: add clock and reset driver for MTMIPS SoCs
> mips: ralink: rt288x: remove clock related code
> mips: ralink: rt305x: remove clock related code
> mips: ralink: rt3883: remove clock related code
> mips: ralink: mt7620: remove clock related code
> mips: ralink: remove reset related code
> mips: ralink: get cpu rate from new driver code
> MAINTAINERS: add Mediatek MTMIPS Clock maintainer
>
> .../bindings/clock/mediatek,mtmips-sysc.yaml | 65 +
> MAINTAINERS | 6 +
> arch/mips/include/asm/mach-ralink/mt7620.h | 35 -
> arch/mips/include/asm/mach-ralink/rt288x.h | 10 -
> arch/mips/include/asm/mach-ralink/rt305x.h | 21 -
> arch/mips/include/asm/mach-ralink/rt3883.h | 8 -
> arch/mips/ralink/clk.c | 26 +-
> arch/mips/ralink/common.h | 5 -
> arch/mips/ralink/mt7620.c | 226 ----
> arch/mips/ralink/of.c | 4 -
> arch/mips/ralink/reset.c | 61 -
> arch/mips/ralink/rt288x.c | 31 -
> arch/mips/ralink/rt305x.c | 78 --
> arch/mips/ralink/rt3883.c | 44 -
> drivers/clk/ralink/Kconfig | 7 +
> drivers/clk/ralink/Makefile | 1 +
> drivers/clk/ralink/clk-mtmips.c | 1134 +++++++++++++++++
> 17 files changed, 1232 insertions(+), 530 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
> create mode 100644 drivers/clk/ralink/clk-mtmips.c
>
> --
> 2.25.1
>
