Hi all: The initial DT-base ls2x rtc driver was written by Wang Xuerui, He has released five versions of patchset before, and all related mail records are shown below if you are interested: https://lore.kernel.org/all/?q=ls2x-rtc In this series of patches, based on the code above, I have added the following support: 1. Add ACPI-related support, as Loongson-3A5000 + LS7A is now ACPI-base by default under LoongArch architecture; 2. Add rtc alarm/walarm related functions. I have tested on Loongson-3A5000LA+LS7A1000/LS7A2000, Loongson-2K1000LA and Loongson-2K0500. BTW: As LS1X does not support DT, we will merge LS2X and LS1X after keguang has completed DT support for LS1X. ------- Changes since v2: - Rebase on the top of rtc-next. patch(1/7): - The new patch. patch(2/7): - Check patchset with "checkpatch.pl --strict"; - Drop static inline functions which are used only once, such as ls2x_rtc_regs_to_time; - Remove the suruct ls2x_rtc_regs and regmap_bulk_xxx() is used to read and write rtc registers; - Clear the RTC wakeup interrupt manually; - Enable the RTC in set_time() and check in read_time(); - device_get_match_data() is used to get ls2x_pm_offset, for LS2k1000 has the different value; - Remove some inexact CONFIG_ACPI; - remove()->remove_new(). Changes since v1: 1. Rebased on top of latest loongarch-next; 2. Add interrupt descriptions to the ls2k and ls7a DTS files to avoid errors when the driver gets the IRQ number, Thanks to Qing Zhang for testing; 3. Remove some inexact CONFIG_ACPI. Thanks. Binbin Zhou (7): dt-bindings: rtc: Subdivision of LS2X RTC compatible rtc: Add support for the Loongson-2K/LS7A RTC LoongArch: Enable LS2X RTC in loongson3_defconfig MIPS: Loongson64: DTS: Add RTC support to LS7A MIPS: Loongson: Enable LS2X RTC in loongson3_defconfig MIPS: Loongson64: DTS: Add RTC support to Loongson-2K MIPS: Loongson: Enable LS2X RTC in loongson2k_defconfig .../devicetree/bindings/rtc/trivial-rtc.yaml | 7 +- arch/loongarch/configs/loongson3_defconfig | 1 + .../boot/dts/loongson/loongson64-2k1000.dtsi | 7 + arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 7 + arch/mips/configs/loongson2k_defconfig | 1 + arch/mips/configs/loongson3_defconfig | 1 + drivers/rtc/Kconfig | 11 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-ls2x.c | 345 ++++++++++++++++++ 9 files changed, 379 insertions(+), 2 deletions(-) create mode 100644 drivers/rtc/rtc-ls2x.c -- 2.39.1
