Arch cflags should be independent to Platform. Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx> --- arch/mips/Makefile | 38 ++++++++++++++++++++++++++++++++++ arch/mips/loongson2ef/Platform | 35 ------------------------------- arch/mips/loongson64/Platform | 16 -------------- 3 files changed, 38 insertions(+), 51 deletions(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 04e46ec24319..a7a4ee66a9d3 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -181,9 +181,47 @@ endif cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -Wa,--trap +# Some -march= flags enable MMI instructions, and GCC complains about that +# support being enabled alongside -msoft-float. Thus explicitly disable MMI. +cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi) +ifdef CONFIG_CPU_LOONGSON64 +cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap +cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a +cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2 +endif +cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi) + cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) +ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS +cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop +cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump +endif + +# +# Some versions of binutils, not currently mainline as of 2019/02/04, support +# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction +# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a +# description). +# +# We disable this in order to prevent the assembler meddling with the +# instruction that labels refer to, ie. if we label an ll instruction: +# +# 1: ll v0, 0(a0) +# +# ...then with the assembler fix applied the label may actually point at a sync +# instruction inserted by the assembler, and if we were using the label in an +# exception table the table would no longer contain the address of the ll +# instruction. +# +# Avoid this by explicitly disabling that assembler behaviour. If upstream +# binutils does not merge support for the flag then we can revisit & remove +# this later - for now it ensures vendor toolchains don't cause problems. +# +cflags-$(CONFIG_CPU_LOONGSON64) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) # For smartmips configurations, there are hundreds of warnings due to ISA overrides # in assembly and header files. smartmips is only supported for MIPS32r1 onwards diff --git a/arch/mips/loongson2ef/Platform b/arch/mips/loongson2ef/Platform index c6f7a4b95997..d446b705fba4 100644 --- a/arch/mips/loongson2ef/Platform +++ b/arch/mips/loongson2ef/Platform @@ -2,41 +2,6 @@ # Loongson Processors' Support # -cflags-$(CONFIG_CPU_LOONGSON2EF) += -Wa,--trap -cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -# -# Some versions of binutils, not currently mainline as of 2019/02/04, support -# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction -# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a -# description). -# -# We disable this in order to prevent the assembler meddling with the -# instruction that labels refer to, ie. if we label an ll instruction: -# -# 1: ll v0, 0(a0) -# -# ...then with the assembler fix applied the label may actually point at a sync -# instruction inserted by the assembler, and if we were using the label in an -# exception table the table would no longer contain the address of the ll -# instruction. -# -# Avoid this by explicitly disabling that assembler behaviour. If upstream -# binutils does not merge support for the flag then we can revisit & remove -# this later - for now it ensures vendor toolchains don't cause problems. -# -cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,) - -# Enable the workarounds for Loongson2f -ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS -cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop -cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump -endif - -# Some -march= flags enable MMI instructions, and GCC complains about that -# support being enabled alongside -msoft-float. Thus explicitly disable MMI. -cflags-y += $(call cc-option,-mno-loongson-mmi) - # # Loongson Machines' Support # diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform index 473404cae1c4..49c9889e3d56 100644 --- a/arch/mips/loongson64/Platform +++ b/arch/mips/loongson64/Platform @@ -1,19 +1,3 @@ -# -# Loongson Processors' Support -# - - -cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap - -ifdef CONFIG_CPU_LOONGSON64 -cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a -cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2 -endif - -# Some -march= flags enable MMI instructions, and GCC complains about that -# support being enabled alongside -msoft-float. Thus explicitly disable MMI. -cflags-y += $(call cc-option,-mno-loongson-mmi) - # # Loongson Machines' Support # -- 2.34.1
