On Mon, Feb 20, 2023 at 4:04 PM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 18/02/2023 13:22, Keguang Zhang wrote:
> > Convert the Loongson1 interrupt controller dt-bindings to json-schema.
> >
> > Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
> > ---
> > .../loongson,ls1x-intc.txt | 24 ---------
> > .../loongson,ls1x-intc.yaml | 51 +++++++++++++++++++
> > 2 files changed, 51 insertions(+), 24 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> > deleted file mode 100644
> > index a63ed9fcb535..000000000000
> > --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
> > +++ /dev/null
> > @@ -1,24 +0,0 @@
> > -Loongson ls1x Interrupt Controller
> > -
> > -Required properties:
> > -
> > -- compatible : should be "loongson,ls1x-intc". Valid strings are:
> > -
> > -- reg : Specifies base physical address and size of the registers.
> > -- interrupt-controller : Identifies the node as an interrupt controller
> > -- #interrupt-cells : Specifies the number of cells needed to encode an
> > - interrupt source. The value shall be 2.
> > -- interrupts : Specifies the CPU interrupt the controller is connected to.
> > -
> > -Example:
> > -
> > -intc: interrupt-controller@1fd01040 {
> > - compatible = "loongson,ls1x-intc";
> > - reg = <0x1fd01040 0x18>;
> > -
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > -
> > - interrupt-parent = <&cpu_intc>;
> > - interrupts = <2>;
> > -};
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
> > new file mode 100644
> > index 000000000000..4cea3ee9fbb1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
> > @@ -0,0 +1,51 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/interrupt-controller/loongson,ls1x-intc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Loongson-1 Interrupt Controller
>
> You changed the title, so this binding now will cover all Loonson-1
> interrupt controllers?
>
Yes.
> > +
> > +maintainers:
> > + - Keguang Zhang <keguang.zhang@xxxxxxxxx>
> > +
> > +description: |
>
> Drop |
>
Will do.
> > + Loongson-1 interrupt controller is connected to the MIPS core interrupt
> > + controller, which controls several groups of interrupts.
> > +
>
>
> Best regards,
> Krzysztof
>
--
Best regards,
Kelvin Cheung
