When support for the level triggered interrupt controller flavor was added with c0ca7262088e, we forgot to update the flags to be set to contain IRQ_LEVEL. While the flow handler is correct, the output from /proc/interrupts does not show such interrupts as being level triggered when they are, correct that. Fixes: c0ca7262088e ("irqchip/brcmstb-l2: Add support for the BCM7271 L2 controller") Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- drivers/irqchip/irq-brcmstb-l2.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-brcmstb-l2.c b/drivers/irqchip/irq-brcmstb-l2.c index e4efc08ac594..091b0fe7e324 100644 --- a/drivers/irqchip/irq-brcmstb-l2.c +++ b/drivers/irqchip/irq-brcmstb-l2.c @@ -161,6 +161,7 @@ static int __init brcmstb_l2_intc_of_init(struct device_node *np, *init_params) { unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; + unsigned int set = 0; struct brcmstb_l2_intc_data *data; struct irq_chip_type *ct; int ret; @@ -208,9 +209,12 @@ static int __init brcmstb_l2_intc_of_init(struct device_node *np, if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) flags |= IRQ_GC_BE_IO; + if (init_params->handler == handle_level_irq) + set |= IRQ_LEVEL; + /* Allocate a single Generic IRQ chip for this node */ ret = irq_alloc_domain_generic_chips(data->domain, 32, 1, - np->full_name, init_params->handler, clr, 0, flags); + np->full_name, init_params->handler, clr, set, flags); if (ret) { pr_err("failed to allocate generic irq chip\n"); goto out_free_domain; -- 2.34.1