Re: [PATCH 10/10] mips: dts: ralink: mt7621: add GB-PC2 LEDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 14, 2022 at 10:56 AM Arınç ÜNAL <arinc.unal@xxxxxxxxxx> wrote:
>
> Add the missing LEDs for GB-PC2. The ethblack-green, ethblue-green, power
> and system LEDs weren't added previously, because they don't exist on the
> device schematics. Tests on a GB-PC2 by me and Petr proved otherwise.
>
> The i2c bus cannot be used on GB-PC2 as its pins are wired to LEDs instead,
> and GB-PC1 does not use it. Therefore, do not enable it on both devices.
>
> Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf
> Tested-by: Petr Louda <petr.louda@xxxxxxxxxx>
> Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
> ---
>  .../boot/dts/ralink/mt7621-gnubee-gb-pc1.dts  |  6 ---
>  .../boot/dts/ralink/mt7621-gnubee-gb-pc2.dts  | 42 ++++++++++++++++---
>  2 files changed, 36 insertions(+), 12 deletions(-)

Reviewed-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux