[PATCH 6/7] MIPS: Loongson64: DTS: Add RTC support to Loongson-2K

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: WANG Xuerui <git@xxxxxxxxxx>

The Loongson-2K RTC module is now supported, enable it.

The MMIO address is unclear from the Loongson 2K1000 user manual, I took
it from Loongson's out-of-tree fork of Linux 4.19.

Signed-off-by: WANG Xuerui <git@xxxxxxxxxx>
Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
Cc: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Huacai Chen <chenhuacai@xxxxxxxxxx>
Cc: Qing Zhang <zhangqing@xxxxxxxxxxx>
Cc: Tiezhu Yang <yangtiezhu@xxxxxxxxxxx>
Cc: zhaoxiao <zhaoxiao@xxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-mips@xxxxxxxxxxxxxxx
---
 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index 8143a61111e3..811a5ab753a2 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -57,6 +57,11 @@ pm: reset-controller@1fe07000 {
 			reg = <0 0x1fe07000 0 0x422>;
 		};
 
+		rtc0: rtc@1fe07800 {
+			compatible = "loongson,ls2x-rtc";
+			reg = <0 0x1fe07800 0 0x78>;
+		};
+
 		liointc0: interrupt-controller@1fe11400 {
 			compatible = "loongson,liointc-2.0";
 			reg = <0 0x1fe11400 0 0x40>,
-- 
2.31.1




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux