Re: [PATCH 0/3] Add SFC support for Ingenic SoCs.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tomasz,

On 2022/7/23 下午10:47, Tomasz Maciej Nowak wrote:
W dniu 22.07.2022 o 18:48, 周琰杰 (Zhou Yanjie) pisze:
1.Use the spi-mem poll status APIs in SPI-NOR to reduce CPU load.
2.Add SFC support for the X1000 SoC, the X1600 SoC, and the X2000 SoC from Ingenic.

Liu Jinghui and Aidan MacDonald provided a lot of assistance during the development of this driver.

周琰杰 (Zhou Yanjie) (3):
   mtd: spi-nor: Use the spi-mem poll status APIs.
   dt-bindings: SPI: Add Ingenic SFC bindings.
   SPI: Ingenic: Add SFC support for Ingenic SoCs.

  .../devicetree/bindings/spi/ingenic,sfc.yaml       |  64 ++
  drivers/mtd/spi-nor/core.c                         |  42 +-
  drivers/spi/Kconfig                                |   9 +
  drivers/spi/Makefile                               |   1 +
  drivers/spi/spi-ingenic-sfc.c                      | 662 +++++++++++++++++++++
  5 files changed, 768 insertions(+), 10 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/spi/ingenic,sfc.yaml
  create mode 100755 drivers/spi/spi-ingenic-sfc.c

Even tough it's still early in revision process, I'll add my
Tested-by: Tomasz Maciej Nowak <tmn505@xxxxxxxxx>

The test was performed with Damai DM6291A SoC which is a Ingenic X1000 IP
but with 256 MiB RAM. No bugs yet observed on my side.


Thanks for you test!






[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux