If we were not specified a correct DTB, we will not be able to print
anything useful with panic() which requires a working console of some
sort. Utilize cfe_die() to callback into the CFE default UART and print
some useful diagnostics.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
arch/mips/Kconfig | 1 +
arch/mips/bmips/setup.c | 14 +++++++++++++-
2 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8db38817320b..0c366088b707 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -294,6 +294,7 @@ config BMIPS_GENERIC
select HARDIRQS_SW_RESEND
select HAVE_PCI
select PCI_DRIVERS_GENERIC
+ select FW_CFE
help
Build a generic DT-based kernel image that boots on select
BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 31bcfa4e08b9..e95b3f78e7cd 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -28,6 +28,7 @@
#include <asm/smp-ops.h>
#include <asm/time.h>
#include <asm/traps.h>
+#include <asm/fw/cfe/cfe_api.h>
#define RELO_NORMAL_VEC BIT(18)
@@ -123,8 +124,19 @@ static const struct bmips_quirk bmips_quirk_list[] = {
{ },
};
+static void __init bmips_init_cfe(void)
+{
+ cfe_seal = fw_arg3;
+
+ if (cfe_seal != CFE_EPTSEAL)
+ return;
+
+ cfe_init(fw_arg0, fw_arg2);
+}
+
void __init prom_init(void)
{
+ bmips_init_cfe();
bmips_cpu_setup();
register_bmips_smp_ops();
}
@@ -165,7 +177,7 @@ void __init plat_mem_setup(void)
dtb = get_fdt();
if (!dtb)
- panic("no dtb found");
+ cfe_die("no dtb found");
__dt_setup_arch(dtb);
--
2.25.1
