Re: [PATCH v2 06/12] irqchip: mips-gic: Multi-cluster support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 09 Jun 2022 11:14:01 +0100,
"Jiaxun Yang" <jiaxun.yang@xxxxxxxxxxx> wrote:
> 
> 
> 
> 在2022年6月8日六月 上午7:05,Marc Zyngier写道:
> > On Tue, 07 Jun 2022 19:23:02 +0100,
> > Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx> wrote:
> >> 
> >> 
> >> 
> >> 在 2022/6/6 12:47, Marc Zyngier 写道:
> >> > On Wed, 25 May 2022 13:10:24 +0100,
> >> > Dragan Mladjenovic <Dragan.Mladjenovic@xxxxxxxxxx> wrote:
> >> >> From: Paul Burton <paulburton@xxxxxxxxxx>
> >> >> 
> >> >> The MIPS I6500 CPU & CM (Coherence Manager) 3.5 introduce the concept of
> >> >> multiple clusters to the system. In these systems each cluster contains
> >> >> its own GIC, so the GIC isn't truly global any longer. We do have the
> >> >> ability to access registers in the GICs of remote clusters using a
> >> >> redirect register block much like the redirect register blocks provided
> >> >> by the CM & CPC, and configured through the same GCR_REDIRECT register
> >> >> that we our mips_cm_lock_other() abstraction builds upon.
> >> >> 
> >> >> It is expected that external interrupts are connected identically to all
> >> >> clusters. That is, if we have a device providing an interrupt connected
> >> >> to GIC interrupt pin 0 then it should be connected to pin 0 of every GIC
> >> >> in the system. This simplifies things somewhat by allowing us for the
> >> >> most part to treat the GIC as though it is still truly global, so long
> >> >> as we take care to configure interrupts in the cluster that we want them
> >> >> affine to.
> >> > I can see how this can work for level interrupts, but how does this
> >> > work for edge interrupts? Is there any guarantee that the interrupt
> >> > will be discarded if routed to a cluster where it isn't configured?
> >> It is supposed to mask the interrupt out on the GIC which belongs to the
> >> cluster that the interrupt is not routed to.
> >> 
> >> When it's masked out GIC simply won't sense any level change.
> >> 
> >> I guess it's sort of guarantee?
> >
> > Pretty much the opposite. There is a *strong* requirement that a
> > masked interrupt can still detect interrupts, so that on unmask the
> > interrupt fires (you'd otherwise lose edge interrupts pretty often).
> Oops, sorry there is a terminology issue. On MIPS Coherent Manager
> manual it uses terminology of “Masked” when vector register of
> a interrupt is cleared.
> 
> It means implementation will guarantee interrupt will be dropped
> when it’s routed to nowhere.

Ah, right, that makes more sense.

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux