Re: [PATCH v2 00/48] ARM: PXA multiplatform support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/23/22 12:55, Arnd Bergmann wrote:
On Sat, Apr 23, 2022 at 1:41 AM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:

On Sat, Apr 23, 2022 at 12:04:31AM +0200, Arnd Bergmann wrote:
On Fri, Apr 22, 2022 at 10:55 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
On 4/22/22 12:16, Arnd Bergmann wrote:
On Fri, Apr 22, 2022 at 7:05 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:

Which machine did you hit this on? Is this on hardware or in qemu?

qemu, as always. borzoi, spitz, terrier, tosa, z2, and sx1 fail.
Also, I just noticed that the failure is not always the same.
z2 fails to boot from initrd, and sx1 fails to boot completely.

That's a lot of machines failing, I hope at least we got the same bugs more
than once here.

For the I/O space, I found now that PXA was not using the standard
virtual I/O address yet, but instead used a NULL-based offset.

I'm not entirely happy with this patch, but this is an outline of what
I think we need to fix that: https://pastebin.com/3nVgQsEw
This one is probably incomplete, at least it breaks sa1100 for now,
and it adds a bogus CONFIG_PCI dependency. I'm also not sure
in what way the last patch in the series triggers it, rather than the
one that removed mach/io.h.

I had sx1 booting in qemu at least, with the omap1 multiplatform series only.
If you have a custom config for this one, make sure you get the right
DEBUG_LL address.

I'll do another round of bisects.


Here is the bisect for the sx1 boot failure.

Odd, I can't reproduce this at all. Do you get any console output at
all for this?

Is this the plain omap1_defconfig, or something else?


No, it is my own sx1 specific configuration.

https://github.com/groeck/linux-build-test/blob/master/rootfs/arm/qemu_sx1_defconfig

I don't recall where I got it from but ...

One thing I keep having to apply myself is this snippet:

diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 0bfad62ea858..87c695703580 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -441,7 +441,6 @@ __arm925_setup:

  #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
         mov     r0, #4                          @ disable write-back
on caches explicitly
-       mcr     p15, 7, r0, c15, c0, 0
  #endif

it does not have CONFIG_CPU_DCACHE_WRITETHROUGH enabled.

Guenter


         adr     r5, arm925_crval

I don't remember what the story is behind this, but I can't actually manage
to boot omap1_defconfig on qemu with the instruction intact.

        Arnd




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux