The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model. - interrupt-controller - syscon - memory-controller - serial devicetree-specification-v0.3.pdf link: https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3 Signed-off-by: Du Huanpeng <dhu@xxxxxxxxxxxxxx> --- arch/mips/boot/dts/ralink/mt7620a.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/mips/boot/dts/ralink/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi index 1f6e5320f486..b9cbde603778 100644 --- a/arch/mips/boot/dts/ralink/mt7620a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi @@ -10,7 +10,7 @@ cpu@0 { }; }; - cpuintc: cpuintc { + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>; interrupt-controller; @@ -25,12 +25,12 @@ palmbus@10000000 { #address-cells = <1>; #size-cells = <1>; - sysc@0 { + syscon@0 { compatible = "ralink,mt7620a-sysc"; reg = <0x0 0x100>; }; - intc: intc@200 { + intc: interrupt-controller@200 { compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc"; reg = <0x200 0x100>; @@ -41,12 +41,12 @@ intc: intc@200 { interrupts = <2>; }; - memc@300 { + memory-controller@300 { compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc"; reg = <0x300 0x100>; }; - uartlite@c00 { + uartlite: serial@c00 { compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a"; reg = <0xc00 0x100>; -- 2.25.1
