Re: [PATCH v2 13/14] dt-bindings: pinctrl: add binding for Ralink RT305X pinctrl

[Rob Herring <robh@xxxxxxxxxx>]

On Thu, Apr 14, 2022 at 08:39:15PM +0300, Arınç ÜNAL wrote:
> Add binding for the Ralink RT305X pin controller for RT3050, RT3052,
> RT3350, RT3352 and RT5350 SoCs.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
> ---
>  .../pinctrl/ralink,rt305x-pinctrl.yaml        | 92 +++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
> new file mode 100644
> index 000000000000..425401c54269
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ralink RT305X Pin Controller
> +
> +maintainers:
> +  - Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
> +  - Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> +
> +description:
> +  Ralink RT305X pin controller for RT3050, RT3052, RT3350, RT3352 and RT5350
> +  SoCs.
> +  The pin controller can only set the muxing of pin groups. Muxing individual
> +  pins is not supported. There is no pinconf support.
> +
> +properties:
> +  compatible:
> +    const: ralink,rt305x-pinctrl

You should have a compatible for each SoC unless these are all just 
fused or package varients of the same chip.

> +
> +patternProperties:
> +  '-pins$':
> +    type: object
> +    patternProperties:
> +      '^(.*-)?pinmux$':
> +        type: object
> +        description: node for pinctrl.
> +        $ref: pinmux-node.yaml#
> +
> +        properties:
> +          groups:
> +            description: The pin group to select.
> +            enum: [
> +              # For RT3050, RT3052 and RT3350 SoCs
> +              i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite,
> +
> +              # For RT3352 SoC
> +              i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1, uartf,
> +              uartlite,
> +
> +              # For RT5350 SoC
> +              i2c, jtag, led, spi, spi_cs1, uartf, uartlite,
> +            ]
> +
> +          function:
> +            description: The mux function to select.
> +            enum: [
> +              # For RT3050, RT3052 and RT3350 SoCs
> +              gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio, pcm gpio,
> +              pcm i2s, pcm uartf, rgmii, sdram, spi, uartf, uartlite,
> +
> +              # For RT3352 SoC
> +              gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna, mdio,
> +              pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf,
> +              uartlite, wdg_cs1,
> +
> +              # For RT5350 SoC
> +              gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, pcm gpio,
> +              pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite, wdg_cs1,
> +            ]
> +
> +        required:
> +          - groups
> +          - function
> +
> +        additionalProperties: false
> +
> +    additionalProperties: false
> +
> +allOf:
> +  - $ref: "pinctrl.yaml#"
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  # Pinmux controller node
> +  - |
> +    pinctrl {
> +      compatible = "ralink,rt305x-pinctrl";
> +
> +      i2c_pins: i2c0-pins {
> +        pinmux {
> +          groups = "i2c";
> +          function = "i2c";
> +        };
> +      };
> +    };
> -- 
> 2.25.1
> 
>