Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs. Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx> --- .../pinctrl/ralink,mt7620-pinctrl.yaml | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml new file mode 100644 index 000000000000..01578b8aa277 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink MT7620 Pin Controller + +maintainers: + - Arınç ÜNAL <arinc.unal@xxxxxxxxxx> + - Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx> + +description: + Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs. + The pin controller can only set the muxing of pin groups. Muxing indiviual pins + is not supported. There is no pinconf support. + +properties: + compatible: + const: ralink,mt7620-pinctrl + +patternProperties: + '-pins$': + type: object + patternProperties: + '^(.*-)?pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + properties: + groups: + description: The pin group to select. + enum: [ + # For MT7620 SoC + ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled, + + # For MT7628 and MT7688 SoCs + gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, + p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0, + uart1, uart2, wdt, wled_an, wled_kn, + ] + + function: + description: The mux function to select. + enum: [ + # For MT7620 SoC + ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst, + pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite, + wdt refclk, wdt rst, wled, + + # For MT7628 and MT7688 SoCs + antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, + p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, + pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0, + uart1, uart2, utif, wdt, wled_an, wled_kn, -, + ] + + required: + - groups + - function + + additionalProperties: false + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + +additionalProperties: false + +examples: + # Pinmux controller node + - | + pinctrl { + compatible = "ralink,mt7620-pinctrl"; + + i2c_pins: i2c0-pins { + pinmux { + groups = "i2c"; + function = "i2c"; + }; + }; + }; -- 2.25.1
