[PATCH] dmaengine: jz4780: set DMA maximum segment size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Set the maximum segment size, since the hardware can do transfers larger
than the default 64 KiB returned by dma_get_max_seg_size().

The maximum segment size is limited by the 24-bit transfer count field
in DMA descriptors. The number of bytes is equal to the transfer count
times the transfer size unit, which is selected by the driver based on
the DMA buffer address and length of the transfer. The size unit can be
as small as 1 byte, so set the maximum segment size to 2^24-1 bytes to
ensure the transfer count will not overflow regardless of the size unit
selected by the driver.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
---
 drivers/dma/dma-jz4780.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index fc513eb2b289..e2ec540e6519 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -8,6 +8,7 @@
 
 #include <linux/clk.h>
 #include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
@@ -911,6 +912,14 @@ static int jz4780_dma_probe(struct platform_device *pdev)
 
 	dd = &jzdma->dma_device;
 
+	/*
+	 * The real segment size limit is dependent on the size unit selected
+	 * for the transfer. Because the size unit is selected automatically
+	 * and may be as small as 1 byte, use a safe limit of 2^24-1 bytes to
+	 * ensure the 24-bit transfer count in the descriptor cannot overflow.
+	 */
+	dma_set_max_seg_size(dev, 0xffffff);
+
 	dma_cap_set(DMA_MEMCPY, dd->cap_mask);
 	dma_cap_set(DMA_SLAVE, dd->cap_mask);
 	dma_cap_set(DMA_CYCLIC, dd->cap_mask);
-- 
2.35.1




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux