On Sun, Mar 27, 2022 at 9:29 PM Sui Jingfeng <15330273260@xxxxxx> wrote: > > Add DT bindings and simple usages for Loongson display controller > found in LS7A1000 bridge chip and LS2k1000 SoC. > > Signed-off-by: Sui Jingfeng <15330273260@xxxxxx> > --- > .../loongson/loongson,display-controller.yaml | 321 ++++++++++++++++++ > 1 file changed, 321 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > > diff --git a/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > new file mode 100644 > index 000000000000..34060ed55a25 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > @@ -0,0 +1,321 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/loongson/loongson,display-controller.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Loongson LS7A1000/LS2K1000/LS2K0500 Display Controller Device Tree Bindings > + > +maintainers: > + - Sui Jingfeng <suijingfeng@xxxxxxxxxxx> > + > +description: |+ > + > + Loongson display controllers are simple which require scanout buffers > + to be physically contiguous. LS2K1000/LS2K0500 is a SOC, only system > + memory is available. LS7A1000/LS7A2000 is bridge chip which is equipped > + with a dedicated video RAM which is 64MB or more, precise size can be > + read from the PCI BAR 2 of the GPU device(0x0014:0x7A15) in the bridge > + chip. > + > + LSDC has two display pipes, each way has a DVO interface which provide > + RGB888 signals, vertical & horizontal synchronisations, data enable and > + the pixel clock. LSDC has two CRTC, each CRTC is able to scanout from > + 1920x1080 resolution at 60Hz. Each CRTC has two FB address registers. > + > + For LS7A1000, there are 4 dedicated GPIOs whose control register is > + located at the DC register space. They are used to emulate two way i2c, > + One for DVO0, another for DVO1. > + > + LS2K1000 and LS2K0500 SoC grab i2c adapter from other module, either > + general purpose GPIO emulated i2c or hardware i2c in the SoC. > + > + LSDC's display pipeline have several components as below description, > + > + The display controller in LS7A1000: > + ___________________ _________ > + | -------| | | > + | CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor | > + | _ _ -------| ^ ^ |_________| > + | | | | | -------| | | > + | |_| |_| | i2c0 <--------+-------------+ > + | -------| > + | DC IN LS7A1000 | > + | _ _ -------| > + | | | | | | i2c1 <--------+-------------+ > + | |_| |_| -------| | | _________ > + | -------| | | | | > + | CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> | Panel | > + | -------| |_________| > + |___________________| > + > + Simple usage of LS7A1000 with LS3A4000 CPU: > + > + +------+ +------------------------------------+ > + | DDR4 | | +-------------------+ | > + +------+ | | PCIe Root complex | LS7A1000 | > + || MC0 | +--++---------++----+ | > + +----------+ HT 3.0 | || || | > + | LS3A4000 |<-------->| +---++---+ +--++--+ +---------+ +------+ > + | CPU |<-------->| | GC1000 | | LSDC |<--->| DDR3 MC |<->| VRAM | > + +----------+ | +--------+ +-+--+-+ +---------+ +------+ > + || MC1 +---------------|--|-----------------+ > + +------+ | | > + | DDR4 | +-------+ DVO0 | | DVO1 +------+ > + +------+ VGA <--|ADV7125|<--------+ +-------->|TFP410|--> DVI/HDMI > + +-------+ +------+ > + > + The display controller in LS2K1000/LS2K0500: > + ___________________ _________ > + | -------| | | > + | CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor | > + | _ _ -------| ^ ^ |_________| > + | | | | | | | | > + | |_| |_| | +------+ | > + | <---->| i2c0 |<---------+ > + | DC IN LS2K1000 | +------+ > + | _ _ | +------+ > + | | | | | <---->| i2c1 |----------+ > + | |_| |_| | +------+ | _________ > + | -------| | | | | > + | CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> | Panel | > + | -------| |_________| > + |___________________| > + > +properties: > + $nodename: > + pattern: "^display-controller@[0-9a-f],[0-9a-f]$" > + > + compatible: > + oneOf: > + - items: > + - enum: > + - loongson,ls7a1000-dc > + - loongson,ls2k1000-dc > + - loongson,ls2k0500-dc > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + i2c@6: NAK on made-up bus numbers. See v11 discussion for details. Rob
