Re: [PATCH] PCI: Marvell: Update PCIe fixup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 02 November 2021 09:42:41 Thomas Bogendoerfer wrote:
> On Mon, Nov 01, 2021 at 04:04:05PM +0100, Pali Rohár wrote:
> > - The code relies on rc_pci_fixup being called, which only happens
> >   when CONFIG_PCI_QUIRKS is enabled, so add that to Kconfig. Omitting
> >   this causes a booting failure with a non-obvious cause.
> > - Update rc_pci_fixup to set the class properly, copying the
> >   more modern style from other places
> > - Correct the rc_pci_fixup comment
> > 
> > This patch just re-applies commit 1dc831bf53fd ("ARM: Kirkwood: Update
> > PCI-E fixup") for all other Marvell platforms which use same buggy PCIe
> > controller.
> > [..]
> 
> > diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> > index 771ca53af06d..c8d51bd20b84 100644
> > --- a/arch/mips/Kconfig
> > +++ b/arch/mips/Kconfig
> > @@ -346,6 +346,7 @@ config MIPS_COBALT
> >  	select CEVT_GT641XX
> >  	select DMA_NONCOHERENT
> >  	select FORCE_PCI
> > +	select PCI_QUIRKS
> >  	select I8253
> >  	select I8259
> >  	select IRQ_MIPS_CPU
> 
> this is enabled by default, via drivers/pci/Kconfig

IIRC 'default y' can be disabled but 'select' not.

> 
> config PCI_QUIRKS
>         default y
>         bool "Enable PCI quirk workarounds" if EXPERT
>         help
>           This enables workarounds for various PCI chipset bugs/quirks.
>           Disable this only if your target machine is unaffected by PCI
>           quirks.
> 
> > diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
> > index 44be65c3e6bb..202f3a0bd97d 100644
> > --- a/arch/mips/pci/fixup-cobalt.c
> > +++ b/arch/mips/pci/fixup-cobalt.c
> > @@ -36,6 +36,12 @@
> >  #define VIA_COBALT_BRD_ID_REG  0x94
> >  #define VIA_COBALT_BRD_REG_to_ID(reg)	((unsigned char)(reg) >> 4)
> >  
> > +/*
> > + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
> > + * is operating as a root complex this needs to be switched to
> > + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
> > + * the device. Decoding setup is handled by the orion code.
> > + */
> >  static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
> >  {
> >  	if (dev->devfn == PCI_DEVFN(0, 0) &&
> 
> this is not a PCIe controller, so how is this patch related ?

I put that comment into all quirk code which is related to Marvell PCIe
device XX:00.0 and changes PCI class type from PCI_CLASS_MEMORY_OTHER to
PCI_CLASS_BRIDGE_HOST.

>From all what I saw, I'm sure that this device with this specific
characteristics is really (non-compliant) Marvell PCIe controller.

But I do not have this hardware to verify it.

> Thomas.
> 
> -- 
> Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
> good idea.                                                [ RFC1925, 2.3 ]



[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux