Re: [PATCH 3/3] watchdog: bcm7038_wdt: support BCM4908 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/28/21 2:30 AM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@xxxxxxxxxx>
> 
> Hardware supported by this driver goes back to the old bcm63xx days. It
> was then reused in BCM7038 and later also in BCM4908.
> 
> Depending on SoC model registers layout differs a bit. This commit
> introduces support for per-chipset registers offsets & adds BCM4908
> layout.
> 
> Later on BCM63xx SoCs support should be added too (probably as platform
> devices due to missing DT). Eventually this driver should replace
> bcm63xx_wdt.c.
> 
> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
> ---

[snip]

> +
> +static const u16 bcm7038_wdt_regs_bcm4908[] = {
> +	[BCM63XX_WDT_REG_DEFVAL]	= 0x28,
> +	[BCM63XX_WDT_REG_CTL]		= 0x2c,
> +	[BCM63XX_WDT_REG_SOFTRESET]	= 0x34,

I don't understand what you are doing here and why you are not
offsetting the "reg" property appropriately when you create your
bcm4908-wdt Device Tree node such that the base starts at 0, and the
existing driver becomes usable as-is. This does not make any sense to me
when it is obviously the simplest way to make the driver "accept" the
resource being passed.

I am going to send my patch series converting the bcm63xx_wdt.c driver
over to bcm7038_wdt.c, feel free to use or discard it.
-- 
Florian



[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux