Re: [PATCH] MIPS: Revert "add support for buggy MT7621S core detection"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/10/21 2:57 am, Ilya Lipnitskiy wrote:
This reverts commit 6decd1aad15f56b169217789630a0098b496de0e. CPULAUNCH
register is not set properly by some bootloaders, causing a regression
until a bootloader change is made, which is hard if not impossible on
some embedded devices. Revert the change until a more robust core
detection mechanism that works on MT7621S routers such as Netgear R6220
as well as platforms like Digi EX15 can be made.

Link: https://lore.kernel.org/lkml/4d9e3b39-7caa-d372-5d7b-42dcec36fec7@xxxxxxxxxx
Fixes: 6decd1aad15f ("MIPS: add support for buggy MT7621S core detection")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@xxxxxxxxx>

Acked-by: Greg Ungerer <gerg@xxxxxxxxxx>

Thanks Ilya for taking care of this.

Regards
Greg


---
  arch/mips/include/asm/mips-cps.h | 23 +----------------------
  1 file changed, 1 insertion(+), 22 deletions(-)

diff --git a/arch/mips/include/asm/mips-cps.h b/arch/mips/include/asm/mips-cps.h
index 35fb8ee6dd33..fd43d876892e 100644
--- a/arch/mips/include/asm/mips-cps.h
+++ b/arch/mips/include/asm/mips-cps.h
@@ -10,8 +10,6 @@
  #include <linux/io.h>
  #include <linux/types.h>
-#include <asm/mips-boards/launch.h>
-
  extern unsigned long __cps_access_bad_size(void)
  	__compiletime_error("Bad size for CPS accessor");
@@ -167,30 +165,11 @@ static inline uint64_t mips_cps_cluster_config(unsigned int cluster)
   */
  static inline unsigned int mips_cps_numcores(unsigned int cluster)
  {
-	unsigned int ncores;
-
  	if (!mips_cm_present())
  		return 0;
/* Add one before masking to handle 0xff indicating no cores */
-	ncores = (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES;
-
-	if (IS_ENABLED(CONFIG_SOC_MT7621)) {
-		struct cpulaunch *launch;
-
-		/*
-		 * Ralink MT7621S SoC is single core, but the GCR_CONFIG method
-		 * always reports 2 cores. Check the second core's LAUNCH_FREADY
-		 * flag to detect if the second core is missing. This method
-		 * only works before the core has been started.
-		 */
-		launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
-		launch += 2; /* MT7621 has 2 VPEs per core */
-		if (!(launch->flags & LAUNCH_FREADY))
-			ncores = 1;
-	}
-
-	return ncores;
+	return (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES;
  }
/**




[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux