Hi,
A gentle ping :)
Here are some new patches that need to be based on this series.
Thanks and best regards!
于 Sun, 30 May 2021 17:49:17 +0100
Paul Cercueil <paul@xxxxxxxxxxxxxxx> 写道:
> Hi,
>
> Here is (finally) my v2 of the JZ4760(B) patchset.
>
> Patches 1-5 are the exact same as in v1.
>
> Patch 6's algorithm was updated with Zhou's feedback.
>
> Cheers,
> -Paul
>
> Paul Cercueil (6):
> dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles
> clk: Support bypassing dividers
> clk: ingenic: Read bypass register only when there is one
> clk: ingenic: Remove pll_info.no_bypass_bit
> clk: ingenic: Support overriding PLLs M/N/OD calc algorithm
> clk: ingenic: Add support for the JZ4760
>
> .../bindings/clock/ingenic,cgu.yaml | 4 +
> drivers/clk/ingenic/Kconfig | 10 +
> drivers/clk/ingenic/Makefile | 1 +
> drivers/clk/ingenic/cgu.c | 92 ++--
> drivers/clk/ingenic/cgu.h | 12 +-
> drivers/clk/ingenic/jz4725b-cgu.c | 12 +-
> drivers/clk/ingenic/jz4740-cgu.c | 12 +-
> drivers/clk/ingenic/jz4760-cgu.c | 428
> ++++++++++++++++++ drivers/clk/ingenic/jz4770-cgu.c |
> 15 +- drivers/clk/ingenic/tcu.c | 2 +
> include/dt-bindings/clock/jz4760-cgu.h | 54 +++
> 11 files changed, 586 insertions(+), 56 deletions(-)
> create mode 100644 drivers/clk/ingenic/jz4760-cgu.c
> create mode 100644 include/dt-bindings/clock/jz4760-cgu.h
>
