On Sun, 13 Jun 2021 at 23:14, Yonghong Song <yhs@xxxxxx> wrote:
>
> On 6/12/21 5:07 PM, Tony Ambardar wrote:
> > On Fri, 11 Jun 2021 at 08:57, Yonghong Song <yhs@xxxxxx> wrote:
> >>
> >> On 6/10/21 6:02 PM, Tony Ambardar wrote:
> >>> Hello,
> >>>
> >>> I encountered an NPE and kernel Oops [1] while running the
> >>> 'test_verifier' selftest on MIPS32 with LTS kernel 5.10.41. This was
> >>> observed during development of a MIPS32 JIT but is verifier-related.
> >>>
> >>> Initial troubleshooting [2] points to an unchecked NULL dereference in
> >>> btf_type_by_id(), with an unexpected BTF type ID. The root cause is
> >>> unclear, whether source of the ID or a potential underlying BTF
> >>> problem.
> >>
> >> Do you know what is the faulty btf ID number? What is the maximum id
> >> for vmlinux BTF?
> >
> > Thanks for the suggestions, Yonghong.
> >
> > I had built/packaged bpftool for the target, which shows the maximum as:
> >
> > root@OpenWrt:~# bpftool btf dump file /sys/kernel/btf/vmlinux format
> > raw|tail -5
> > [43179] FUNC 'pci_load_of_ranges' type_id=43178 linkage=static
> > [43180] ARRAY '(anon)' type_id=23 index_type_id=23 nr_elems=16
> > [43181] FUNC 'pcibios_plat_dev_init' type_id=29264 linkage=static
> > [43182] FUNC 'pcibios_map_irq' type_id=29815 linkage=static
> > [43183] FUNC 'mips_pcibios_init' type_id=115 linkage=static
> >
> > After adding NULL handling and debug pr_err() to kernel_type_name(), I next see:
> >
> > root@OpenWrt:~# ./test_verifier_eb 828
> > [ 87.196692] btf_type_by_id(btf_vmlinux, 3062497280) returns NULL
> > [ 87.196958] btf_type_by_id(btf_vmlinux, 2936995840) returns NULL
> > #828/p reference tracking: bpf_sk_release(btf_tcp_sock) FAIL
> >
> > Those large type ids make me suspect an endianness issue, even though bpftool
> > can still properly access the vmlinux BTF. Changing byte order and
> > looking up the
> > resulting type ids seems to confirm this:
> >
> > Check endianness:
> > 3062497280 -> 0xB68A0000 --swap endian--> 0x00008AB6 -> 35510
> > bpftool btf dump file /sys/kernel/btf/vmlinux format raw|fgrep "[35510]":
> > [35510] STRUCT 'tcp_sock' size=1752 vlen=136
> >
> > Check endianness:
> > 2936995840 -> 0xAF0F0000 --swap endian--> 0x00000FAF -> 4015
> > bpftool btf dump file /sys/kernel/btf/vmlinux format raw|fgrep "[4015]":
> > [4015] STRUCT 'sock_common' size=112 vlen=25
> >
> > As a further test, I repeated "test_verifier 828" across mips{32,64}{be,le}
> > systems and confirm seeing the problem only with the big-endian ones.
>
> From the above information, looks like vmlinux BTF is correct.
> Below resolve_btfids command output seems indicating the btf_id list
> is also correct.
>
> The kernel_type_name is used in a few places for verifier verbose output.
>
> $ grep kernel_type_name kernel/bpf/verifier.c
> static const char *kernel_type_name(const struct btf* btf, u32 id)
> verbose(env, "%s",
> kernel_type_name(reg->btf, reg->btf_id));
> regno, kernel_type_name(reg->btf,
> reg->btf_id),
> kernel_type_name(btf_vmlinux,
> *arg_btf_id));
>
> The most suspicous target is reg->btf_id, which is propagated from
> the result of bpf_sk_lookup_tcp() helper.
>
> >
> >> The involved helper is bpf_sk_release.
> >>
> >> static const struct bpf_func_proto bpf_sk_release_proto = {
> >> .func = bpf_sk_release,
> >> .gpl_only = false,
> >> .ret_type = RET_INTEGER,
> >> .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON,
> >> };
> >>
> >> Eventually, the btf_id is taken from btf_sock_ids[6] where
> >> btf_sock_ids is a kernel global variable.
> >>
> >> Could you check btf_sock_ids[6] to see whether the number
> >> makes sense?
> >
> > What I see matches the second btf_type_by_id() NULL call above:
> > [ 56.556121] btf_sock_ids[6]: 2936995840
> >
> >> The id is computed by resolve_btfids in
> >> tools/bpf/resolve_btfids, you might add verbose mode to your linux build
> >> to get more information.
> >
> > The verbose build didn't print any details of the btf ids. Was there anything
> > special to do in invocation? I manually ran "resolve_btfids -v vmlinux" from
> > the build dir and this, strangely, gave slightly different results than bpftool
> > but not the huge endian-swapped type ids. Is this expected?
> >
> > # ./tools/bpf/resolve_btfids/resolve_btfids -v vmlinux
> > ...
> > patching addr 116: ID 35522 [tcp_sock]
> > ...
> > patching addr 112: ID 4021 [sock_common]
> >
> > Do any of the details above help narrow down things? What do you suggest
> > for next steps?
>
> We need to identify issues by dumping detailed verifier logs.
> Could you apply the following change?
>
> --- a/tools/testing/selftests/bpf/test_verifier.c
> +++ b/tools/testing/selftests/bpf/test_verifier.c
> @@ -1088,7 +1088,7 @@ static void do_test_single(struct bpf_test *test,
> bool unpriv,
> attr.insns_cnt = prog_len;
> attr.license = "GPL";
> if (verbose)
> - attr.log_level = 1;
> + attr.log_level = 3;
> else if (expected_ret == VERBOSE_ACCEPT)
> attr.log_level = 2;
> else
>
> Run command like `./test_verifier -v 828 828`?
>
> I attached the verifier output for x86_64.
> Maybe by comparing x86 output vs. mips32 output, you can
> find which insn starts to have *wrong* verifier state
> and then we can go from there.
I realized too late your test output must be for a different kernel version as
well as arch, as the test numbering is different and doesn't match my test:
"reference tracking: bpf_sk_release(btf_tcp_sock)".
Given the problem is seen on big-endian and not little-systems, I applied
your patch for both mips32 variant systems and recaptured log output,
which should make for a stricter A/B comparison. I also kept my earlier
patches to catch the NULLs and print debug info.
The logs are identical until insn #18, where the failing MIPS32BE shows:
18: R0_w=ptr_or_null_(null)(id=3,off=0,imm=0)
R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000
fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm
fp-48=mmmmmmmm refs=2
while the succeed MIPS32LE test shows:
18: R0_w=ptr_or_null_tcp_sock(id=3,off=0,imm=0)
R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000
fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm
fp-48=mmmmmmmm refs=2
There are then further differences you can see in the attached logs. It's
not clear to me what these differences mean however. Any ideas?
Following your earlier comments on the large, endian-swapped values
in btf_sock_ids[6], I noticed this is true of all btf_sock_ids[]
elements, based on debug output:
btf_sock_ids[0] = 2139684864
btf_sock_ids[1] = 2794061824
btf_sock_ids[2] = 2844459008
btf_sock_ids[3] = 1234305024
btf_sock_ids[4] = 3809411072
btf_sock_ids[5] = 1946812416
btf_sock_ids[6] = 2936995840
btf_sock_ids[7] = 3062497280
btf_sock_ids[8] = 2861236224
btf_sock_ids[9] = 1251082240
btf_sock_ids[10] = 1334968320
btf_sock_ids[11] = 1267859456
btf_sock_ids[12] = 1318191104
If these are populated by resolve_btfids, how could we re-verify that
it's being done properly?
> >
> > Thanks,
> > Tony
> >
> >>>
> >>> Has this been seen before? How best to debug this further or resolve?
> >>> What other details would be useful for BPF kernel developers?
> >>>
> >>> Thanks for any help,
> >>> Tony
> >>>
> >>> [1]:
> >>> (Host details)
> >>> kodidev:~/openwrt-project$ ./staging_dir/host/bin/pahole --version
> >>> v1.21
> >>>
> >>> (Target details)
> >>> root@OpenWrt:/# uname -a
> >>> Linux OpenWrt 5.10.41 #0 SMP Tue Jun 1 00:54:31 2021 mips GNU/Linux
> >>>
> >>> root@OpenWrt:~# sysctl net.core.bpf_jit_enable=0; ./test_verifier 826 828
> >>> net.core.bpf_jit_enable = 0
> >>>
> >>> #826/p reference tracking: branch tracking valid pointer null comparison OK
> >>> #827/p reference tracking: branch tracking valid pointer value comparison OK
> >>> CPU 0 Unable to handle kernel paging request at virtual address
> >>> 00000000, epc == 80244654, ra == 80244654
> >>> Oops[#1]:
> >>> CPU: 0 PID: 16274 Comm: test_verifier Not tainted 5.10.41 #0
> >>> $ 0 : 00000000 00000001 00000000 0000a8a2
> >>> $ 4 : 835ac580 a6280000 00000000 00000001
> >>> $ 8 : 835ac580 a6280000 00000000 02020202
> >>> $12 : 8348de58 834ba800 00000000 00000000
> >>> $16 : 835ac580 8098be2c fffffff3 834bdb38
> >>> $20 : 8098be0c 00000001 00000018 00000000
> >>> $24 : 00000000 01415415
> >>> $28 : 834bc000 834bdac8 00000005 80244654
> >>> Hi : 00000017
> >>> Lo : 0a3d70a2
> >>> epc : 80244654 kernel_type_name+0x20/0x38
> >>> ra : 80244654 kernel_type_name+0x20/0x38
> >>> Status: 1000a403 KERNEL EXL IE
> >>> Cause : 00800008 (ExcCode 02)
> >>> BadVA : 00000000
> >>> PrId : 00019300 (MIPS 24Kc)
> >>> Modules linked in: pppoe ppp_async pppox ppp_generic mac80211_hwsim
> >>> mac80211 iptable_nat ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss
> >>> xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac
> >>> xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack
> >>> xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT
> >>> xt_MASQUERADE xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY
> >>> slhc sch_mqprio sch_cake pcnet32 nf_reject_ipv4 nf_nat nf_log_ipv4
> >>> nf_flow_table nf_conntrack_netlink nf_conncount iptable_raw
> >>> iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat
> >>> cls_flower act_vlan pktgen sch_teql sch_sfq sch_red sch_prio sch_pie
> >>> sch_multiq sch_gred sch_fq sch_dsmark sch_codel em_text em_nbyte
> >>> em_meta em_cmp act_simple act_police act_pedit act_ipt act_csum
> >>> libcrc32c em_ipset cls_bpf act_bpf act_ctinfo act_connmark
> >>> nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sch_tbf sch_ingress sch_htb
> >>> sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw
> >>> cls_flow cls_basic act_skbedit act_mirred act_gact xt_set
> >>> ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport
> >>> ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net
> >>> ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip
> >>> ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip
> >>> ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set
> >>> nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter
> >>> ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb dummy netlink_diag
> >>> mii
> >>> Process test_verifier (pid: 16274, threadinfo=c1418596, task=05765195,
> >>> tls=77e5aec8)
> >>> Stack : 83428000 83428000 8098be2c 00000000 83428000 8024af78 834bacdc 834bb000
> >>> a98a0000 834e2580 834e2c00 00000000 834e2c00 8023da9c 834bb070 00000013
> >>> 80925164 80924f44 00000000 80925164 00000000 83428140 80bc3864 834bb070
> >>> 834e2c00 00000000 00000010 802c441c 00000000 00000000 00000000 00000000
> >>> 00000000 00000000 00000000 00000000 00000000 00000056 00000000 00000000
> >>> ...
> >>> Call Trace:
> >>> [<80244654>] kernel_type_name+0x20/0x38
> >>> [<8024af78>] check_helper_call+0x1c9c/0x1dbc
> >>> [<8024d008>] do_check_common+0x1f70/0x2a3c
> >>> [<8024fb6c>] bpf_check+0x18f8/0x2308
> >>> [<802369ec>] bpf_prog_load+0x378/0x860
> >>> [<80237e1c>] __do_sys_bpf+0x3e0/0x2100
> >>> [<801142d8>] syscall_common+0x34/0x58
> >>>
> >>> Code: afbf0014 0c099b58 02002025 <8c450000> 8fbf0014 02002025
> >>> 8fb00010 08099b4f 27bd0018
> >>>
> >>> ---[ end trace ab13ac5f89eb825b ]---
> >>> Kernel panic - not syncing: Fatal exception
> >>> Rebooting in 3 seconds..
> >>> QEMU: Terminated
> >>>
> >>>
> >>> [2]:
> >>> Function Code:
> >>> ==============
> >>> const char *kernel_type_name(u32 id)
> >>> {
> >>> return btf_name_by_offset(btf_vmlinux,
> >>> btf_type_by_id(btf_vmlinux, id)->name_off);
> >>> }
> >>>
> >>> const struct btf_type *btf_type_by_id(const struct btf *btf, u32 type_id)
> >>> {
> >>> if (type_id > btf->nr_types)
> >>> return NULL;
> >>>
> >>> return btf->types[type_id];
> >>> }
> >>>
> >>> Disassembled Code:
> >>> ==================
> >>> 0x0000000000000000: AF BF 00 14 sw $ra, 0x14($sp)
> >>> 0x0000000000000004: 0C 09 9B 58 jal btf_type_by_id
> >>> 0x0000000000000008: 02 00 20 25 move $a0, $s0
> >>> 0x000000000000000c: 8C 45 00 00 lw $a1, ($v0) <-- NPE
> >>> 0x0000000000000010: 8F BF 00 14 lw $ra, 0x14($sp)
> >>> 0x0000000000000014: 02 00 20 25 move $a0, $s0
> >>> 0x0000000000000018: 8F B0 00 10 lw $s0, 0x10($sp)
> >>> 0x000000000000001c: 08 09 9B 4F j btf_name_by_offset
> >>> 0x0000000000000020: 27 BD 00 18 addiu $sp, $sp, 0x18
> >>>
#828/p reference tracking: bpf_sk_release(btf_tcp_sock) FAIL
Failed to load prog 'No error information'!
func#0 @0
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r2 = 0
1: R1=ctx(id=0,off=0,imm=0) R2_w=inv0 R10=fp0
1: (63) *(u32 *)(r10 -8) = r2
last_idx 1 first_idx 0
regs=4 stack=0 before 0: (b7) r2 = 0
2: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000
2: (7b) *(u64 *)(r10 -16) = r2
3: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000 fp-16_w=00000000
3: (7b) *(u64 *)(r10 -24) = r2
4: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000
4: (7b) *(u64 *)(r10 -32) = r2
5: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000
5: (7b) *(u64 *)(r10 -40) = r2
6: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000
6: (7b) *(u64 *)(r10 -48) = r2
7: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
7: (bf) r2 = r10
8: R1=ctx(id=0,off=0,imm=0) R2_w=fp0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
8: (07) r2 += -48
9: R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
9: (b7) r3 = 36
10: R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R3_w=inv36 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
10: (b7) r4 = 0
11: R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R3_w=inv36 R4_w=inv0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
11: (b7) r5 = 0
12: R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R3_w=inv36 R4_w=inv0 R5_w=inv0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
12: (85) call bpf_sk_lookup_tcp#84
last_idx 12 first_idx 0
regs=8 stack=0 before 11: (b7) r5 = 0
regs=8 stack=0 before 10: (b7) r4 = 0
regs=8 stack=0 before 9: (b7) r3 = 36
13: R0_w=sock_or_null(id=2,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16_w=0000mmmm fp-24_w=mmmmmmmm fp-32_w=mmmmmmmm fp-40_w=mmmmmmmm fp-48_w=mmmmmmmm refs=2
13: (55) if r0 != 0x0 goto pc+1
R0_w=inv0 R10=fp0 fp-8=????0000 fp-16_w=0000mmmm fp-24_w=mmmmmmmm fp-32_w=mmmmmmmm fp-40_w=mmmmmmmm fp-48_w=mmmmmmmm
14: R0_w=inv0 R10=fp0 fp-8=????0000 fp-16_w=0000mmmm fp-24_w=mmmmmmmm fp-32_w=mmmmmmmm fp-40_w=mmmmmmmm fp-48_w=mmmmmmmm
14: (95) exit
15: R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
15: (bf) r6 = r0
16: R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
16: (bf) r1 = r0
17: R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R1_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
17: (85) call bpf_skc_to_tcp_sock#137
18: R0_w=ptr_or_null_(null)(id=3,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
18: (55) if r0 != 0x0 goto pc+3
R0_w=inv0 R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
19: R0_w=inv0 R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
19: (bf) r1 = r6
20: R0_w=inv0 R1_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
20: (85) call bpf_sk_release#86
21: R0_w=inv(id=0) R6_w=inv(id=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm
21: (95) exit
22: R0_w=ptr_(null)(id=0,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
22: (bf) r1 = r0
23: R0_w=ptr_(null)(id=0,off=0,imm=0) R1_w=ptr_(null)(id=0,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
23: (85) call bpf_sk_release#86
R1 is of type (null) but (null) is expected
processed 24 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
#828/p reference tracking: bpf_sk_release(btf_tcp_sock) , verifier log:
func#0 @0
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r2 = 0
1: R1=ctx(id=0,off=0,imm=0) R2_w=inv0 R10=fp0
1: (63) *(u32 *)(r10 -8) = r2
last_idx 1 first_idx 0
regs=4 stack=0 before 0: (b7) r2 = 0
2: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000
2: (7b) *(u64 *)(r10 -16) = r2
3: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000 fp-16_w=00000000
3: (7b) *(u64 *)(r10 -24) = r2
4: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000
4: (7b) *(u64 *)(r10 -32) = r2
5: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000
5: (7b) *(u64 *)(r10 -40) = r2
6: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000
6: (7b) *(u64 *)(r10 -48) = r2
7: R1=ctx(id=0,off=0,imm=0) R2_w=invP0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
7: (bf) r2 = r10
8: R1=ctx(id=0,off=0,imm=0) R2_w=fp0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
8: (07) r2 += -48
9: R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
9: (b7) r3 = 36
10: R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R3_w=inv36 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
10: (b7) r4 = 0
11: R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R3_w=inv36 R4_w=inv0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
11: (b7) r5 = 0
12: R1=ctx(id=0,off=0,imm=0) R2_w=fp-48 R3_w=inv36 R4_w=inv0 R5_w=inv0 R10=fp0 fp-8=????0000 fp-16_w=00000000 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
12: (85) call bpf_sk_lookup_tcp#84
last_idx 12 first_idx 0
regs=8 stack=0 before 11: (b7) r5 = 0
regs=8 stack=0 before 10: (b7) r4 = 0
regs=8 stack=0 before 9: (b7) r3 = 36
13: R0_w=sock_or_null(id=2,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16_w=0000mmmm fp-24_w=mmmmmmmm fp-32_w=mmmmmmmm fp-40_w=mmmmmmmm fp-48_w=mmmmmmmm refs=2
13: (55) if r0 != 0x0 goto pc+1
R0_w=inv0 R10=fp0 fp-8=????0000 fp-16_w=0000mmmm fp-24_w=mmmmmmmm fp-32_w=mmmmmmmm fp-40_w=mmmmmmmm fp-48_w=mmmmmmmm
14: R0_w=inv0 R10=fp0 fp-8=????0000 fp-16_w=0000mmmm fp-24_w=mmmmmmmm fp-32_w=mmmmmmmm fp-40_w=mmmmmmmm fp-48_w=mmmmmmmm
14: (95) exit
15: R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
15: (bf) r6 = r0
16: R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
16: (bf) r1 = r0
17: R0=sock(id=0,ref_obj_id=2,off=0,imm=0) R1_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
17: (85) call bpf_skc_to_tcp_sock#137
18: R0_w=ptr_or_null_tcp_sock(id=3,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
18: (55) if r0 != 0x0 goto pc+3
R0_w=inv0 R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
19: R0_w=inv0 R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
19: (bf) r1 = r6
20: R0_w=inv0 R1_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
20: (85) call bpf_sk_release#86
21: R0_w=inv(id=0) R6_w=inv(id=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm
21: (95) exit
22: R0_w=ptr_tcp_sock(id=0,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
22: (bf) r1 = r0
23: R0_w=ptr_tcp_sock(id=0,off=0,imm=0) R1_w=ptr_tcp_sock(id=0,off=0,imm=0) R6_w=sock(id=0,ref_obj_id=2,off=0,imm=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm refs=2
23: (85) call bpf_sk_release#86
24: R0=inv(id=0) R6=inv(id=0) R10=fp0 fp-8=????0000 fp-16=0000mmmm fp-24=mmmmmmmm fp-32=mmmmmmmm fp-40=mmmmmmmm fp-48=mmmmmmmm
24: (95) exit
processed 25 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1
OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
