1.Add support for probing mmc driver on the JZ4775 SoC from Ingenic.
2.The drive clock selection and sample clock selection have been
supported since JZ4775, not X1000. So support for these two
functions has been added for JZ4775 and JZ4780.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
---
Notes:
v1->v2:
1.Remove unnecessary renaming as Paul Cercueil's suggestion.
2.Reuse the ID of JZ4775 and JZ4780 to simplify the code.
3.Add support of drive clock selection and sample clock
selection for JZ4775 and JZ4780.
drivers/mmc/host/jz4740_mmc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index b3c636e..f3172e5 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -674,7 +674,7 @@ static void jz4740_mmc_send_command(struct jz4740_mmc_host *host,
cmdat |= JZ_MMC_CMDAT_WRITE;
if (host->use_dma) {
/*
- * The 4780's MMC controller has integrated DMA ability
+ * The JZ4780's MMC controller has integrated DMA ability
* in addition to being able to use the external DMA
* controller. It moves DMA control bits to a separate
* register. The DMA_SEL bit chooses the external
@@ -866,7 +866,7 @@ static int jz4740_mmc_set_clock_rate(struct jz4740_mmc_host *host, int rate)
writew(div, host->base + JZ_REG_MMC_CLKRT);
if (real_rate > 25000000) {
- if (host->version >= JZ_MMC_X1000) {
+ if (host->version >= JZ_MMC_JZ4780) {
writel(JZ_MMC_LPM_DRV_RISING_QTR_PHASE_DLY |
JZ_MMC_LPM_SMP_RISING_QTR_OR_HALF_PHASE_DLY |
JZ_MMC_LPM_LOW_POWER_MODE_EN,
@@ -959,6 +959,7 @@ static const struct of_device_id jz4740_mmc_of_match[] = {
{ .compatible = "ingenic,jz4740-mmc", .data = (void *) JZ_MMC_JZ4740 },
{ .compatible = "ingenic,jz4725b-mmc", .data = (void *)JZ_MMC_JZ4725B },
{ .compatible = "ingenic,jz4760-mmc", .data = (void *) JZ_MMC_JZ4760 },
+ { .compatible = "ingenic,jz4775-mmc", .data = (void *) JZ_MMC_JZ4780 },
{ .compatible = "ingenic,jz4780-mmc", .data = (void *) JZ_MMC_JZ4780 },
{ .compatible = "ingenic,x1000-mmc", .data = (void *) JZ_MMC_X1000 },
{},
--
2.7.4
