Re: [PATCH v5 3/4] KVM: stats: Add documentation for statistics data binary interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi David,

On Wed, May 19, 2021 at 11:57 AM David Matlack <dmatlack@xxxxxxxxxx> wrote:
>
> On Mon, May 17, 2021 at 9:25 AM Jing Zhang <jingzhangos@xxxxxxxxxx> wrote:
> >
> > Update KVM API documentation for binary statistics.
> >
> > Signed-off-by: Jing Zhang <jingzhangos@xxxxxxxxxx>
> > ---
> >  Documentation/virt/kvm/api.rst | 171 +++++++++++++++++++++++++++++++++
> >  1 file changed, 171 insertions(+)
> >
> > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> > index 7fcb2fd38f42..9a6aa9770dfd 100644
> > --- a/Documentation/virt/kvm/api.rst
> > +++ b/Documentation/virt/kvm/api.rst
> > @@ -5034,6 +5034,169 @@ see KVM_XEN_VCPU_SET_ATTR above.
> >  The KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST type may not be used
> >  with the KVM_XEN_VCPU_GET_ATTR ioctl.
> >
> > +4.130 KVM_STATS_GETFD
> > +---------------------
> > +
> > +:Capability: KVM_CAP_STATS_BINARY_FD
> > +:Architectures: all
> > +:Type: vm ioctl, vcpu ioctl
> > +:Parameters: none
> > +:Returns: statistics file descriptor on success, < 0 on error
> > +
> > +Errors:
> > +
> > +  ======     ======================================================
> > +  ENOMEM     if the fd could not be created due to lack of memory
> > +  EMFILE     if the number of opened files exceeds the limit
> > +  ======     ======================================================
> > +
> > +The file descriptor can be used to read VM/vCPU statistics data in binary
> > +format. The file data is organized into three blocks as below:
> > ++-------------+
> > +|   Header    |
> > ++-------------+
> > +| Descriptors |
> > ++-------------+
> > +| Stats Data  |
> > ++-------------+
> > +
> > +The Header block is always at the start of the file. It is only needed to be
> > +read one time after a system boot.
>
> By system boot do you mean the host or the VM? If the host then it's
> probably just cleaner to omit that part entirely and just say "It is
> only needed to be read once.".
>
Will change "system boot" to "VM boot".
> > +It is in the form of ``struct kvm_stats_header`` as below::
> > +
> > +       #define KVM_STATS_ID_MAXLEN             64
> > +
> > +       struct kvm_stats_header {
> > +               char id[KVM_STATS_ID_MAXLEN];
> > +               __u32 name_size;
> > +               __u32 count;
> > +               __u32 desc_offset;
> > +               __u32 data_offset;
> > +       };
> > +
> > +The ``id`` field is identification for the corresponding KVM statistics. For
> > +KVM statistics, it is in the form of "kvm-{kvm pid}", like "kvm-12345". For
>
> Should this say "For VM statistics, ..." instead?
>
Yes, will fix it.
> > +VCPU statistics, it is in the form of "kvm-{kvm pid}/vcpu-{vcpu id}", like
> > +"kvm-12345/vcpu-12".
> > +
> > +The ``name_size`` field is the size (byte) of the statistics name string
> > +(including trailing '\0') appended to the end of every statistics descriptor.
> > +
> > +The ``count`` field is the number of statistics.
> > +
> > +The ``desc_offset`` field is the offset of the Descriptors block from the start
> > +of the file indicated by the file descriptor.
> > +
> > +The ``data_offset`` field is the offset of the Stats Data block from the start
> > +of the file indicated by the file descriptor.
> > +
> > +The Descriptors block is only needed to be read once after a system boot. It is
>
> Ditto here about system boot.
>
> > +an array of ``struct kvm_stats_desc`` as below::
>
> Consider omitting these macros from the documentation, or moving them
> to later. Readers right here are expecting to see the struct
> kvm_stats_desc given the previous line.
>
How about changing "as below" to "as shown in below code block"?
> > +
> > +       #define KVM_STATS_TYPE_SHIFT            0
> > +       #define KVM_STATS_TYPE_MASK             (0xF << KVM_STATS_TYPE_SHIFT)
> > +       #define KVM_STATS_TYPE_CUMULATIVE       (0x0 << KVM_STATS_TYPE_SHIFT)
> > +       #define KVM_STATS_TYPE_INSTANT          (0x1 << KVM_STATS_TYPE_SHIFT)
> > +       #define KVM_STATS_TYPE_MAX              KVM_STATS_TYPE_INSTANT
> > +
> > +       #define KVM_STATS_UNIT_SHIFT            4
> > +       #define KVM_STATS_UNIT_MASK             (0xF << KVM_STATS_UNIT_SHIFT)
> > +       #define KVM_STATS_UNIT_NONE             (0x0 << KVM_STATS_UNIT_SHIFT)
> > +       #define KVM_STATS_UNIT_BYTES            (0x1 << KVM_STATS_UNIT_SHIFT)
> > +       #define KVM_STATS_UNIT_SECONDS          (0x2 << KVM_STATS_UNIT_SHIFT)
> > +       #define KVM_STATS_UNIT_CYCLES           (0x3 << KVM_STATS_UNIT_SHIFT)
> > +       #define KVM_STATS_UNIT_MAX              KVM_STATS_UNIT_CYCLES
> > +
> > +       #define KVM_STATS_SCALE_SHIFT           8
> > +       #define KVM_STATS_SCALE_MASK            (0xF << KVM_STATS_SCALE_SHIFT)
> > +       #define KVM_STATS_SCALE_POW10           (0x0 << KVM_STATS_SCALE_SHIFT)
> > +       #define KVM_STATS_SCALE_POW2            (0x1 << KVM_STATS_SCALE_SHIFT)
> > +       #define KVM_STATS_SCALE_MAX             KVM_STATS_SCALE_POW2
>
> Terminology nit: I think usually this part is called the "base". e.g.
> when you decompose a number X into N * B^E, B is the "base" and E is
> the "exponent". I see you're using "exponent" already but it might
> make sense to change "scale" to "base" throughout this series.
>
Will change "SCALE" to "SCALE_BASE".
> > +
> > +       struct kvm_stats_desc {
> > +               __u32 flags;
> > +               __s16 exponent;
> > +               __u16 size;
> > +               __u32 unused1;
> > +               __u32 unused2;
> > +               char name[0];
> > +       };
> > +
> > +The ``flags`` field contains the type and unit of the statistics data described
> > +by this descriptor. The following flags are supported:
>
> nit: Suggest breaking this list out into separate lists so readers can
> differentiate between the type, unit, and scale. Something like:
>
> Bits 0-3 of ``flags`` encode the type:
>
> * ``KVM_STATS_TYPE_CUMULATIVE`` ...
> * ``KVM_STATS_TYPE_INSTANT`` ...
>
> Bits 4-7 of ``flags encode the unit:
>
> * ``KVM_STATS_UNIT_NONE`` ...
> ...
> etc.
>
Good suggestion. Will do that.
> > +  * ``KVM_STATS_TYPE_CUMULATIVE``
> > +    The statistics data is cumulative. The value of data can only be increased.
> > +    Most of the counters used in KVM are of this type.
> > +    The corresponding ``count`` filed for this type is always 1.
> > +  * ``KVM_STATS_TYPE_INSTANT``
> > +    The statistics data is instantaneous. Its value can be increased or
> > +    decreased. This type is usually used as a measurement of some resources,
> > +    like the number of dirty pages, the number of large pages, etc.
> > +    The corresponding ``count`` field for this type is always 1.
> > +  * ``KVM_STATS_UNIT_NONE``
> > +    There is no unit for the value of statistics data. This usually means that
> > +    the value is a simple counter of an event.
> > +  * ``KVM_STATS_UNIT_BYTES``
> > +    It indicates that the statistics data is used to measure memory size, in the
> > +    unit of Byte, KiByte, MiByte, GiByte, etc. The unit of the data is
> > +    determined by the ``exponent`` field in the descriptor. The
> > +    ``KVM_STATS_SCALE_POW2`` flag is valid in this case. The unit of the data is
> > +    determined by ``pow(2, exponent)``. For example, if value is 10,
> > +    ``exponent`` is 20, which means the unit of statistics data is MiByte, we
> > +    can get the statistics data in the unit of Byte by
> > +    ``value * pow(2, exponent) = 10 * pow(2, 20) = 10 MiByte`` which is
> > +    10 * 1024 * 1024 Bytes.
> > +  * ``KVM_STATS_UNIT_SECONDS``
> > +    It indicates that the statistics data is used to measure time/latency, in
> > +    the unit of nanosecond, microsecond, millisecond and second. The unit of the
> > +    data is determined by the ``exponent`` field in the descriptor. The
> > +    ``KVM_STATS_SCALE_POW10`` flag is valid in this case. The unit of the data
> > +    is determined by ``pow(10, exponent)``. For example, if value is 2000000,
> > +    ``exponent`` is -6, which means the unit of statistics data is microsecond,
> > +    we can get the statistics data in the unit of second by
> > +    ``value * pow(10, exponent) = 2000000 * pow(10, -6) = 2 seconds``.
> > +  * ``KVM_STATS_UNIT_CYCLES``
> > +    It indicates that the statistics data is used to measure CPU clock cycles.
> > +    The ``KVM_STATS_SCALE_POW10`` flag is valid in this case. For example, if
> > +    value is 200, ``exponent`` is 4, we can get the number of CPU clock cycles
> > +    by ``value * pow(10, exponent) = 200 * pow(10, 4) = 2000000``.
> > +
> > +The ``exponent`` field is the scale of corresponding statistics data. It has two
> > +values as follows:
> > +  * ``KVM_STATS_SCALE_POW10``
>
> I thought the scale was encoded in ``flags`` not ``exponent``? Isn't
> the exponent the
>
The base is encoded in ``flags``, not the exponent.
> > +    The scale is based on power of 10. It is used for measurement of time and
> > +    CPU clock cycles.
> > +  * ``KVM_STATS_SCALE_POW2``
> > +    The scale is based on power of 2. It is used for measurement of memory size.
>
> It might be useful to give an example of how to use the exponent field
> in practice.
>
Those examples where we discuss ``flags`` field also cover the usage
of exponent field.
> > +
> > +The ``size`` field is the number of values of this statistics data. It is in the
> > +unit of ``unsigned long`` for VCPU or ``__u64`` for VM.
> > +
> > +The ``unused1`` and ``unused2`` fields are reserved for future
> > +support for other types of statistics data, like log/linear histogram.
> > +
> > +The ``name`` field points to the name string of the statistics data. The name
> > +string starts at the end of ``struct kvm_stats_desc``.
> > +The maximum length (including trailing '\0') is indicated by ``name_size``
> > +in ``struct kvm_stats_header``.
> > +
> > +The Stats Data block contains an array of data values of type ``struct
> > +kvm_vm_stats_data`` or ``struct kvm_vcpu_stats_data``. It would be read by
> > +user space periodically to pull statistics data.
> > +The order of data value in Stats Data block is the same as the order of
> > +descriptors in Descriptors block.
> > +  * Statistics data for VM::
> > +
> > +       struct kvm_vm_stats_data {
> > +               unsigned long value[0];
> > +       };
> > +
> > +  * Statistics data for VCPU::
> > +
> > +       struct kvm_vcpu_stats_data {
> > +               __u64 value[0];
> > +       };
> > +
> >  5. The kvm_run structure
> >  ========================
> >
> > @@ -6891,3 +7054,11 @@ This capability is always enabled.
> >  This capability indicates that the KVM virtual PTP service is
> >  supported in the host. A VMM can check whether the service is
> >  available to the guest on migration.
> > +
> > +8.33 KVM_CAP_STATS_BINARY_FD
> > +----------------------------
> > +
> > +:Architectures: all
> > +
> > +This capability indicates the feature that user space can create get a file
> > +descriptor for every VM and VCPU to read statistics data in binary format.
> > --
> > 2.31.1.751.gd2f1c929bd-goog
> >
Thanks,
Jing



[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux