Hi Paul,
On 2021/3/7 下午10:17, Paul Cercueil wrote:
Hi,
Here are a set of patches to add support for the Ingenic JZ4760(B) SoCs.
One thing to note is that the ingenic,jz4760-tcu is undocumented for now,
as I will update the TCU documentation in a different patchset.
Zhou: the CGU code now supports overriding the PLL M/N/OD calc
algorithm, please tell me if it works for you.
The previously mentioned problems have all been solved, this proves that
your patch is available for I2S PLL.
I will improve and clean up the relevant code, then send it immediately
after your patches is merged.
Thanks and best regards!
Cheers,
-Paul
Paul Cercueil (6):
dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles
clk: Support bypassing dividers
clk: ingenic: Read bypass register only when there is one
clk: ingenic: Remove pll_info.no_bypass_bit
clk: ingenic: Support overriding PLLs M/N/OD calc algorithm
clk: ingenic: Add support for the JZ4760
.../bindings/clock/ingenic,cgu.yaml | 4 +
drivers/clk/ingenic/Kconfig | 10 +
drivers/clk/ingenic/Makefile | 1 +
drivers/clk/ingenic/cgu.c | 92 ++--
drivers/clk/ingenic/cgu.h | 12 +-
drivers/clk/ingenic/jz4725b-cgu.c | 12 +-
drivers/clk/ingenic/jz4740-cgu.c | 12 +-
drivers/clk/ingenic/jz4760-cgu.c | 433 ++++++++++++++++++
drivers/clk/ingenic/jz4770-cgu.c | 15 +-
drivers/clk/ingenic/tcu.c | 2 +
include/dt-bindings/clock/jz4760-cgu.h | 54 +++
11 files changed, 591 insertions(+), 56 deletions(-)
create mode 100644 drivers/clk/ingenic/jz4760-cgu.c
create mode 100644 include/dt-bindings/clock/jz4760-cgu.h
