Re: [PATCH v3 1/4] Add support for Realtek RTL838x/RTL839x switch SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 30, 2020 at 10:22:02PM +0100, Bert Vermeulen wrote:
> The RTL838x/839x family of SoCs are Realtek switches with an embedded
> MIPS core.
> 
> * RTL838x - 500MHz 4kce single core - 1Gbit ports and L2 features
> * RTL839x - 700MHz 34Kc single core - 1Gbit ports and L2 features
> 
> These switches, depending on the exact part number, will have anywhere
> between 8 and 50 ports. The MIPS core is wired to a switch cpu port which
> has a tagging feature allowing us to make use of the DSA subsystem.
> The SoCs are somewhat basic in certain areas, getting better with more
> advanced features on newer series.
> 
> The switch functionality is MMIO-mapped via a large MFD region.
> 
> The SoCs have the following peripherals
> * ethernet
> * switch
> * uart - ns16550a
> * spi-flash interface
> * gpio
> * wdt
> * led
> 
> The code was derived from various vendor SDKs based on Linux v2.6
> kernels.
> 
> This patchset allows us to boot RTL838x/RTL839x units with basic support.
> Most of the other drivers are already written and functional, and work to
> get them upstream is already in progress.
> 
> Signed-off-by: Birger Koblitz <mail@xxxxxxxxxxxxxxxxx>
> Signed-off-by: Bert Vermeulen <bert@xxxxxxxx>
> Signed-off-by: John Crispin <john@xxxxxxxxxxx>
> Signed-off-by: Sander Vanheule <sander@xxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mips/realtek-rtl.yaml | 24 ++++++

Generally, this should be a separate patch.

>  arch/mips/boot/dts/Makefile                   |  1 +
>  arch/mips/boot/dts/realtek/rtl838x.dtsi       | 21 +++++
>  arch/mips/boot/dts/realtek/rtl839x.dtsi       | 21 +++++
>  arch/mips/boot/dts/realtek/rtl83xx.dtsi       | 83 +++++++++++++++++++
>  5 files changed, 150 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mips/realtek-rtl.yaml
>  create mode 100644 arch/mips/boot/dts/realtek/rtl838x.dtsi
>  create mode 100644 arch/mips/boot/dts/realtek/rtl839x.dtsi
>  create mode 100644 arch/mips/boot/dts/realtek/rtl83xx.dtsi
> 
> diff --git a/Documentation/devicetree/bindings/mips/realtek-rtl.yaml b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
> new file mode 100644
> index 000000000000..aadff8ce0f49
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
> @@ -0,0 +1,24 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mips/realtek-rtl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek RTL83xx/93xx SoC series device tree bindings
> +
> +maintainers:
> +  - Bert Vermeulen <bert@xxxxxxxx>
> +  - Sander Vanheule <sander@xxxxxxxxxxxxx>
> +
> +properties:
> +  $nodename:
> +    const: "/"
> +  compatible:
> +    oneOf:
> +      # RTL8382-based boards
> +      - items:
> +          - enum:
> +              - cisco,sg220-26
> +          - const: realtek,rtl8382-soc
> +
> +additionalProperties: true
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index 0259238d7a2e..60bd7d2a9ad8 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -14,6 +14,7 @@ subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= ni
>  subdir-$(CONFIG_MACH_PIC32)		+= pic32
>  subdir-$(CONFIG_ATH79)			+= qca
>  subdir-$(CONFIG_RALINK)			+= ralink
> +subdir-$(CONFIG_MACH_REALTEK_RTL)	+= realtek
>  subdir-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= xilfpga
>  
>  obj-$(CONFIG_BUILTIN_DTB)	:= $(addsuffix /, $(subdir-y))
> diff --git a/arch/mips/boot/dts/realtek/rtl838x.dtsi b/arch/mips/boot/dts/realtek/rtl838x.dtsi
> new file mode 100644
> index 000000000000..6cc4ff5c0d19
> --- /dev/null
> +++ b/arch/mips/boot/dts/realtek/rtl838x.dtsi
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
> +
> +/ {
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu@0 {
> +			compatible = "mips,mips4KEc";
> +			reg = <0>;
> +			clocks = <&baseclk 0>;
> +			clock-names = "cpu";
> +		};
> +	};
> +
> +	baseclk: baseclk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <500000000>;
> +	};
> +};
> diff --git a/arch/mips/boot/dts/realtek/rtl839x.dtsi b/arch/mips/boot/dts/realtek/rtl839x.dtsi
> new file mode 100644
> index 000000000000..2b5bad8fcf2f
> --- /dev/null
> +++ b/arch/mips/boot/dts/realtek/rtl839x.dtsi
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
> +
> +/ {
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu@0 {
> +			compatible = "mips,mips34Kc";
> +			reg = <0>;
> +			clocks = <&baseclk 0>;
> +			clock-names = "cpu";
> +		};
> +	};
> +
> +	baseclk: baseclk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <500000000>;
> +	};
> +};
> diff --git a/arch/mips/boot/dts/realtek/rtl83xx.dtsi b/arch/mips/boot/dts/realtek/rtl83xx.dtsi
> new file mode 100644
> index 000000000000..17fa90002e00
> --- /dev/null
> +++ b/arch/mips/boot/dts/realtek/rtl83xx.dtsi
> @@ -0,0 +1,83 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +	};
> +
> +	cpuintc: cpuintc {
> +		compatible = "mti,cpu-interrupt-controller";
> +		#address-cells = <0>;
> +		#interrupt-cells = <1>;
> +		interrupt-controller;
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0xb8000000 0x10000>;
> +
> +		spi: spi@1200 {
> +			compatible = "realtek,rtl-spi";

Not documented. Needs to have an SoC specific compatible.

> +			reg = <0x1200 0x100>;
> +
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		uart0: uart@2000 {

serial@2000

Build the dtb with W=1 and run 'make dtbs_check' and fix any warnings. 
The above issue should show up.

> +			compatible = "ns16550a";

No quirks for this? Best to have a more specific compatible in case you 
do.

> +			reg = <0x2000 0x100>;
> +
> +			clock-frequency = <200000000>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <31>;
> +
> +			reg-io-width = <1>;
> +			reg-shift = <2>;
> +			fifo-size = <1>;
> +			no-loopback-test;
> +
> +			status = "disabled";
> +		};
> +
> +		uart1: uart@2100 {
> +			compatible = "ns16550a";
> +			reg = <0x2100 0x100>;
> +
> +			clock-frequency = <200000000>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <30>;
> +
> +			reg-io-width = <1>;
> +			reg-shift = <2>;
> +			fifo-size = <1>;
> +			no-loopback-test;
> +
> +			status = "disabled";
> +		};
> +
> +		intc: interrupt-controller@3000 {
> +			compatible = "realtek,rtl-intc";

Not documented.

> +			#interrupt-cells = <1>;
> +			interrupt-controller;
> +			reg = <0x3000 0x20>;
> +		};
> +	};
> +
> +	switch_bus: switch-bus@bb000000 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0xbb000000 0x10000>;
> +	};
> +};
> -- 
> 2.25.1
> 



[Index of Archives]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux