This patchset ports CPU clock detection for MT7621 from OpenWrt
and adds a complete clock plan for the mt7621 SOC.
The documentation for this SOC only talks about two registers
regarding to the clocks:
* SYSC_REG_CPLL_CLKCFG0 - provides some information about boostrapped
refclock. PLL and dividers used for CPU and some sort of BUS (AHB?).
* SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable clocks for
all or some ip cores.
No documentation about a probably existent set of dividers for each ip
core is included in the datasheets. So we cannot make anything better,
AFAICT.
Looking into driver code, and some openWRT patched there are
another frequences which are used in some drivers (uart, sd...).
According to all of this information the clock plan for this
SoC is set as follows:
- Main top clock "xtal" from where all the rest of the world is
derived.
- CPU clock "cpu" derived from "xtal" frequencies and a bunch of
register reads and predividers.
- BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz.
- Fixed clocks from "xtal":
* "50m": 50 MHz.
* "125m": 125 MHz.
* "150m": 150 MHz.
* "250m": 250 MHz.
* "270m": 270 MHz.
We also have a buch of gate clocks with their parents:
- "hsdma": "150m"
- "fe": "250m"
- "sp_divtx": "270m"
- "timer": "50m"
- "pcm": "270m"
- "pio": "50m"
- "gdma": "bus"
- "nand": "125m"
- "i2c": "50m"
- "i2s": "270m"
- "spi": "bus"
- "uart1": "50m"
- "uart2": "50m"
- "uart3": "50m"
- "eth": "50m"
- "pcie0": "125m"
- "pcie1": "125m"
- "pcie2": "125m"
- "crypto": "250m"
- "shxc": "50m"
There was a previous attempt of doing this here[0] but the author
(Chuanhong Guo) did not wanted to make assumptions of a clock plan
for the platform that time. It seems that now he has a better idea of
how the clocks are dispossed for this SoC so he share code[1] where
some frequencies and clock parents for the gates are coded from a
real mediatek private clock plan.
I do really want this to be upstreamed so according to the comments
in previous attempt[0] from Oleksij Rempel and the frequencies in
code[1] I have tried to do this by myself.
All of this patches have been tested in a GNUBee PC1 resulting in a
working platform.
Changes in v4:
- Add Acked-by from Rob Herring for binding headers (PATCH 1/6).
- Convert bindings to not use syscon phandle and declare clock as
a child of the syscon node. Update device tree and binding doc
accordly.
- Make use of 'syscon_node_to_regmap' in driver code instead of
get this using the phandle function.
- Properly unregister clocks for the error path of the function
'mt7621_clk_init'.
- Include ARRAY_SIZE of fixed clocks in the 'count' to kzalloc
of 'clk_data'.
- Add new patch changing invalid vendor 'mtk' in favour of 'mediatek'
which is the one listed in 'vendor-prefixes.yaml'. Update mt7621 code
accordly. I have added this patch inside this series because clk
binding is referring syscon node and the string for that node was
with not listed vendor. Hence update and have all of this correct
in the same series.
Changes in v3:
- Fix compilation warnings reported by kernel test robot because of
ignoring return values of 'of_clk_hw_register' in functions
'mt7621_register_top_clocks' and 'mt7621_gate_ops_init'.
- Fix dts file and binding documentation 'clock-output-names'.
Changes in v2:
- Remove the following patches:
* dt: bindings: add mt7621-pll device tree binding documentation.
* MIPS: ralink: add clock device providing cpu/ahb/apb clock for mt7621.
- Move all relevant clock code to 'drivers/clk/ralink/clk-mt7621.c' and
unify there previous 'mt7621-pll' and 'mt7621-clk' into a unique driver
and binding 'mt7621-clk'.
- Driver is not a platform driver anymore and now make use of 'CLK_OF_DECLARE'
because we need clocks available in 'plat_time_init' before setting up
the timer for the GIC.
- Use new fixed clocks as parents for different gates and deriving from 'xtal'
using frequencies in[1].
- Adapt dts file and bindings header and documentation for new changes.
- Change MAINTAINERS file to only contains clk-mt7621.c code and
mediatek,mt7621-clk.yaml file.
[0]: https://www.lkml.org/lkml/2019/7/23/1044
[1]: https://github.com/981213/linux/commit/2eca1f045e4c3db18c941135464c0d7422ad8133
Sergio Paracuellos (6):
dt-bindings: clock: add dt binding header for mt7621 clocks
dt: bindings: add mt7621-clk device tree binding documentation
clk: ralink: add clock driver for mt7621 SoC
staging: mt7621-dts: make use of new 'mt7621-clk'
staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid
'mtk'
MAINTAINERS: add MT7621 CLOCK maintainer
.../bindings/clock/mediatek,mt7621-clk.yaml | 67 +++
MAINTAINERS | 6 +
arch/mips/ralink/mt7621.c | 6 +-
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/ralink/Kconfig | 14 +
drivers/clk/ralink/Makefile | 2 +
drivers/clk/ralink/clk-mt7621.c | 434 ++++++++++++++++++
drivers/staging/mt7621-dts/gbpc1.dts | 11 -
drivers/staging/mt7621-dts/mt7621.dtsi | 85 ++--
include/dt-bindings/clock/mt7621-clk.h | 41 ++
11 files changed, 609 insertions(+), 59 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mt7621-clk.yaml
create mode 100644 drivers/clk/ralink/Kconfig
create mode 100644 drivers/clk/ralink/Makefile
create mode 100644 drivers/clk/ralink/clk-mt7621.c
create mode 100644 include/dt-bindings/clock/mt7621-clk.h
--
2.25.1
